Open On-Chip Debugger 0.8.0-dev (2015-01-09-16:23)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
srst_only separate srst_gates_jtag srst_push_pull connect_deassert_srst
adapter speed: 1000 kHz
Info : add flash_bank kinetis k60.flash
cortex_m reset_config sysresetreq
Info : add flash_bank kinetis pflash.0
Info : add flash_bank kinetis pflash.1
Info : add flash_bank kinetis pflash.2
Info : add flash_bank kinetis pflash.3
Started by GNU ARM Eclipse
Info : clock speed 1000 kHz
Info : JTAG tap: k60.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
Info : k60.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'gdb' connection from 3333
Warn : acknowledgment received, but no packet pending
undefined debug reason 7 - target needs reset
Info : JTAG tap: k60.cpu tap/device found: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x0000069c msp: 0x20000000
semihosting is enabled
Warn : No RTOS could be auto-detected!
Warn : No RTOS could be auto-detected!
Error: JTAG-DP STICKY ERROR
Error: MEM_AP_CSW 0x23000062, MEM_AP_TAR 0x4
Error: Failed to write memory at 0x00000004
Error: JTAG-DP STICKY ERROR
Error: MEM_AP_CSW 0x23000062, MEM_AP_TAR 0x404
Error: Failed to write memory at 0x00000404
Info : dropped 'gdb' connection
