Hi,
I use P&E to debug our source code(The mcu is MPC5744P, the version of S32 is 1.2).
When I pressed the debug button, connection error would be pop up. The sequence is shown below:
step 1: shown confirm window. I press "Yes" button.
step 2: P&E connection assistant window. I press "Retry" button.
step 3: need power cycle. Then I power down the target and press "OK"
step 4: unknown information.
In "Console" window, some error are list below:
so, how I can solve this issue? Thank you.
Bryce