Multi Source Translation Content

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

Multi Source Translation Content

ディスカッション

ソート順:
MCUXpresso IDE v25.6.136 upgrades the built-in configWhy can't I start debugging after using tools? I'm developing for the FRDM-IMXRT1186 using MCUXpresso IDE v25.6.136. After downloading and installing the latest IDE from the official website, and then installing the latest SDK (26.06), I imported a sample project named frdmimxrt1186_rled_blinky_cm7. However, the mex file wouldn't open. So I upgraded the configuration tool, and now the mex file can be opened. But clicking "Debug" fails to connect to the development board, as shown in the image. What should I do? (I've already tried upgrading the linkserver version, but it didn't work.) breeze_i_0-1785204475278.png #FRDM-IMXRT1186 #MIMXRT1180 MCUXpresso-IDE LINKERSERVER 回复: MCUXpresso IDE v25.6.136升级内置的config tools之后不能启动调试,为什么 Thank you for your letter. Please check the LinkServer path currently used by the IDE in Preferences → MCUXpresso IDE → Debug Options → LinkServer Options in MCUXpresso IDE. Please navigate to the LinkServer installation directory corresponding to this path and execute the following command to confirm whether the LinkServer can recognize the onboard debugger: linkserver probes Please note that it is recommended to execute the command in this directory rather than directly in any command line window to avoid calling other versions of LinkServer in the system PATH. If you have installed a different version of LinkServer, you can also try checking "Custom path" and specifying the corresponding LinkServer installation directory to prevent the IDE from still calling the old version or the LinkServer under an abnormal path. 回复: MCUXpresso IDE v25.6.136升级内置的config tools之后不能启动调试,为什么 I've tried everything, but it still doesn't work. Re: MCUXpresso IDE v25.6.136升级内置的config tools之后不能启动调试,为什么 Hi @breeze_i , Thank you for your interest in the NXP RT product line and for using the NXP community. Regarding your question, I suggest you check the following points: 1. First, check if the firewall or antivirus software is blocking localhost communication between the IDE/LinkServer/redlinkserv; 2. Do not continue testing in the original workspace. Create a new empty workspace and then re-import the demo. 3. Execute Clean Up Debug in the IDE, then close the IDE, unplug the development board/debugger, reconnect, and try Debug again. mayliu1_0-1785219755566.png Please check the above steps first. Best Regards May
記事全体を表示
我想使用 Flexio 作为特殊的 SPI,同时输出 20 位 MOSI 信号。 cs 和 clk 是共享的。 20 根 MOS 线连接到 20 个 DAC 芯片,Flexio Multibeat 在这种环境下能工作吗? 通信与控制(I3C | I2C | SPI | FlexCAN | 以太网 | FlexIO) Re: I want to use flexio to work as a special spi, 20bit mosi output at the same time 我用的芯片是MCN947。 需要要到flexio 模拟spi 控制20片DAC输出, DAC是24位的。 这20片DAC 的cs、clk是公共的,但是每个芯片都单独有一个MOSI。没有MISO。因此它不是严格意义的SPI, 而是有20个MOSI的SPI。 每次输出的时候,同时更新20片dac的值。 我的构想是,SHIFBUF 存放20个DAC中的1位。8个SHIFTBUF存放8位。 一次DMA传输完成20片DAC的8bit数据更新。 三次DMA将24位数据同步更新完。最后拉高片选。 有这个想法,看了下flexio 的例程,不知道怎么下手写这个代码。 不知道你们有没有相关的例程。也不知道我这个思路是否最优。 Re: I want to use flexio to work as a special spi, 20bit mosi output at the same time 你好@justdomyself 请您更详细地描述一下您的问题好吗? 请与我们联系: 你使用的是哪款MCU? 您的软件配置方式。 您遇到了什么问题? 任何有助于我们理解问题的补充信息。 您也可以用中文描述这个问题。 谢谢! BR 爱丽丝 Re: I want to use flexio to work as a special spi, 20bit mosi output at the same time 你好@justdomyself 感谢您的回复。 抱歉,我们没有使用20 个 MOSI 输出驱动 DAC 的 MCXN947的示例。现有的 FlexIO 示例主要设计用于模拟标准 SPI 接口。 对于您的应用,您可能需要根据您的具体需求开发自定义的 FlexIO 驱动程序。 您可以参考以下示例作为起点: AN14175:使用 FlexIO 模拟四通道SPI 控制器 | 恩智浦半导体 谢谢! BR 爱丽丝
記事全体を表示
T1024 QorIQ 裸机 电路板支持包。,适用于 CodeWarrior PA10.5 我们需要与 CodeWarrior Power Architecture v10.5 相匹配的官方 QorIQ T10xx 裸机 电路板支持包软件包。 必填内容: 1. 为 T1024 提供完整的裸机启动 电路板支持包。 2. RCW、RESET、L1/L2 缓存、DDR、中断、PCIe 底层驱动程序源 3. CodeWarrior PA10.5 固定项目模板 4. T10xx RDB 板的参考,引用裸机演示项目 背景: 我们正在使用 CodeWarrior PA10.5 在 T1024 上开发裸机固件,LSDK 2.0 Linux SDK 仅提供 U-启动 和 Linux 源代码,缺少官方的 CodeWarrior 裸机 电路板支持包。请提供电路板支持包。官方存档或下载链接。 谢谢。 Re: T1024 QorIQ Bare-Metal BSP for CodeWarrior PA10.5 我们没有适用于 T1024 平台的裸机电路板支持包。。 您可能需要其他平台上的 NetComm 软件作为参考,引用。 https://www.nxp.com.cn/products/processors-and-microcontrollers/power-architecture/qoriq-communication-processors/p-series/netcomm-software-resources:NetComm_Software
記事全体を表示
Yocto Linux 电路板支持包。 的支持期限 你好, 请问您能否提供以下方面的信息? 我们计划使用 NXP 提供的 Yocto Linux 电路板支持包。开发基于 i.MX 8M Plus 的板 请问您能否回答以下关于电路板支持包。的问题 1. 电路板支持包。版本发布后多久会提供更新? 2. 当新的 Yocto LTS 版本发布时,电路板支持包。通常需要多长时间才能更新以整合新的 Yocto LTS 版本? 3. 我们了解到,可以通过“电路板支持包。 生命周期维护:保持 Linux ® 电路板支持包。 安全”获得网络安全更新。 请问您能否与我们联系: - 可获得的最长支持期限,以及 这项服务的大概费用是多少? 感谢您的支持。 我们期待您的回复。 顺祝商祺!
記事全体を表示
ソフトウェア1.9.1を使っても新しい写真を追加できません(無法添加图片) 先日使っていた時、いつも通り新しい画像(PNG形式)を追加したのですが、読み込みに時間がかかり、その間は他の機能が使えませんでした。写真2をご覧ください。 ソフトを閉じて再起動したところ、以前アップロードしたライブラリの画像がすべて消え、新しい画像もアップロードできませんでした。写真1をご覧ください。 いつか使用するとき、いつものように新しい写真(PNG形式)を追加し、長い時間をかけてダウンロードし、その間はその機能も使用できなくなります。 デバイスをオフにした後、以前に上に転送されていた画像がこの場所にすべて失われ、新しい画像も上に転送されなくなりました。 huang_yingxue_1-1785210488463.png huang_yingxue_0-1785210370827.png Re: Can't add new pictures when using the software 1.9.1(无法添加图片) こんにちは@huang_yingxue まずは最新のGuiGuiderバージョンを試してみて、問題が再現可能かどうか教えてください。もし依然として発生した場合は、上記の追加情報に基づいて調査を継続できます。 ご理解いただきありがとうございます。 BR ハリー
記事全体を表示
MC9S08QG8 我下载了 CodeWarrior(经典 IDE)v6.3,但是无法安装。我用的是Windows 11系统。请问如何才能找到适用于mc9s08qg8的编译器? Re: MC9S08QG8 你好, CodeWarrior v6.3 与 Windows 11 不兼容;要在 Windows 11 中使用 CodeWarrior,请更新至 v11.1。我查找 MC9S08QG8 设备,并且该设备在此版本中可用,以便使用该编译器。 您可以从此链接下载: CodeWarrior ® for MCUs (Eclipse IDE) 11.1 此致敬礼,路易斯
記事全体を表示
MC9S08QG8 CodeWarrior(classic IDE)v6.3をダウンロードしましたが、インストールできません。私はWindows 11を使用しています。mc9s08qg8用のコンパイラはどうやって入手できますか? Re: MC9S08QG8 こんにちは、 CodeWarrior v6.3はWindows 11と互換性がありません。Windows 11でCodeWarriorを使用するには、v11.1にアップデートしてください。MC9S08QG8 デバイスを探したところ、このバージョンでコンパイラを使用するために利用可能でした。 こちらのリンクからダウンロードできます: CodeWarrior® for MCUS (Eclipse IDE) 11.1 敬具、ルイス
記事全体を表示
imx93 cannot load elf in mcimx93evk_ethosu_apps (sdk2.14) I need try sdk2.14 demo: mcimx93evk_ethosu_apps after the elf is get .I load this elf to m33. it failed:                         remoteproc remoteproc0: Registered carveout doesn't fit da request [ 236.970879] rproc-virtio: probe of rproc-virtio.1.auto failed with error -12 [ 236.984471] remoteproc remoteproc0: Registered carveout doesn't fit da request [ 236.992036] rproc-virtio: probe of rproc-virtio.2.auto failed with error -12 I donnot know what happen. Re: imx93 cannot load elf in mcimx93evk_ethosu_apps (sdk2.14) Hi @bighero77, Thank you for contacting NXP Support. According to the README file, the application required for your use case is ethosu_apps_rpmsg, not ethosu_apps. README extract: 4. Test process --------------- 4.1 Example ethosu_apps_rpmsg is built as .out or .elf and installed in rootfs. In Linux command line, user can run the following command to do inference for the model. #./inference_runner -d /dev/ethosu0 -n mobilenet_v1_1.0_224_pb_int8_vela.tflite -i stopwatch.bmp -l labels.txt -o output_data_detection -t 1080000000 When the examples runs, the log and inference result would be seen on the terminal as below. Send Ping Send version request Send capabilities request Capabilities: version_status:1 version:{ major=0, minor=0, patch=0 } product:{ major=6, minor=0, patch=0 } architecture:{ major=1, minor=0, patch=6 } driver:{ major=0, minor=16, patch=0 } macs_per_cc:8 cmd_stream_version:0 custom_dma:false Create network Create inference Wait for inferences Inference status: success Detected: jinrikisha, confidence:70 Detected: horse cart, confidence:70 Detected: academic gown, confidence:70 Detected: howler monkey, confidence:70 For other demos, such as face recognition, please refer to the user manual. 4.2 Example ethous_apps is built as .bin. In U-Boot prompt, user can run the following command to do inference for the conv2d op model. u-boot=> tftp 0x80000000 ethosu_apps.bin;cp.b 0x80000000 0x201e0000 0x20000;bootaux 0x201e0000 0 When the example runs, the log and inference result would be seen on the terminal as below. Initialize Arm Ethos-U Inference status: success Based on the documentation, if your goal is to run inference from Linux using /dev/ethosu0, then ethosu_apps_rpmsg is the correct application to use. Best regards, Alejandro Garcia
記事全体を表示
S32K3 的 SVD 文件 - 许可证问题 我想发布一些基于 S32K388 和 S32K344 SVD 文件开发的软件。但SVD文件包含以下文本: 版权所有 2016-2024 NXP NXP 机密专有软件。本软件归 NXP 所有或受其控制。 由恩智浦半导体(NXP)所有,且仅可严格按照适用法律法规使用。 许可条款。通过明确接受这些条款或下载, 安装、激活和/或以其他方式使用该软件,即表示您同意 您同意已阅读并同意遵守本条款。 受此类许可条款的约束。如果您不同意受其约束,则表示您同意接受此类许可条款的约束。 如果违反适用的许可条款,则您不得保留、安装或激活。 或者以其他方式使用该软件。 我能否将这段代码放到一个公共代码库中?或者我需要在代码库中添加说明,告诉用户下载 S32DS 并自行提取 SVD 文件吗? Re: SVD files for S32K3 - license question 谢谢你的提问。遗憾的是,S32K3 SVD 文件(S32K344.svd,S32K388.svd)带有“NXP 机密和专有”许可,不允许在公共存储库中重新分发或发布衍生作品。 我们建议采用以下方法: 请勿将 SVD 派生代码直接包含在公共仓库中,因为这很可能违反许可条款。 相反,请在您的存储库中提供构建脚本/工具,并指示用户自行下载 S32DS 并提取 SVD 文件,然后在本地运行代码生成步骤。 如果您需要获得明确许可才能公开发布衍生代码,请联系您的 NXP 销售代表,申请正式的许可例外。 在 NXP 澄清或更新 SVD 文件许可条款之前,这是最安全的方法。
記事全体を表示
Windows 10/11 IoT EnterpriseのIMX95LPD5EVK-19サポートおよびインストール手順 NXPチームの皆様、こんにちは。 弊社では、以下の詳細を含むNXP i.MX95 19mm×19mm評価キットをご用意しております。 EVK: IMX95LPD5EVK-19 幅木マーキング:IMX95LPD5BB-19 REV B 想定されるインストール対象: オンボードeMMC このボードにWindows 10/11 IoT Enterprise ARM64 、できればWindows 10/11 IoT Enterprise LTSC 2024をインストールしたいと考えています。 Windows 11 IoT EnterpriseがIMX95LPD5EVK-19でサポートされているか確認していただけますか? 対応されている場合は、公式のBSP、必要なソフトウェアパッケージ、そしてWindowsをオンボードeMMCにインストールするための参考資料として完全なインストールまたはフラッシュ手順を共有してください。 私たちは特に、IMX95LPD5EVK-19用の公式かつ基板検証済みのガイドを探しています。 ありがとう。 よろしくお願いいたします。 ジャシム Windows 10 IoT Enterprise Re: Windows 10/11 IoT Enterprise support and installation procedure for IMX95LPD5EVK-19 @yipingwangさん、確認していただきありがとうございます。 現在、IMX95LPD5EVK-19 用の Windows 10/11 IoT Enterprise BSP やボード検証済みのインストール手順は公開されておらず、公式にサポートされているものもないことを理解しています。 FUTUREのi.MX95サポートについては、NXPのWindows IoT BSPリリースページを注視していきましょう。 ありがとう。 Re: Windows 10/11 IoT Enterprise support and installation procedure for IMX95LPD5EVK-19 現時点では、IMX95LPD5EVK-19 用の、一般公開されている、または公式に文書化された Windows 10/11 IoT Enterprise BSP は見つかりません。現在のNXPのWindows IoTサポートページおよびMicrosoft Windows IoTサポートマトリックスには、i.MX8ファミリーデバイスおよびi.MX93 EVKのサポートが記載されていますが、i.MX95 EVKは記載されていません。したがって、現時点ではIMX95LPD5EVK-19向けの公式Windowsインストール手順、BSPパッケージ、ボード検証済みのフラッシュガイドを提供することはできません。もしNXPを通じてi.MX95のWindowsサポートが利用可能になる場合、NXPのWindows IoT BSPリリースページおよび付随するリリースノートで公開される見込みです。 https://www.nxp.com/design/design-center/software/embedded-software/i-mx-software/windows-10-11-iot-enterprise-for-i-mx-applications-processors:IMXWIN10IOT
記事全体を表示
広告モデル こんにちは MRFE6VS25NR1のADSモデルをダウンロードしましたが、このエラーで動作しませんでした モデルFSL_MRFE6VS25N_FET2。FET2M1'(ファイル『C:/Users/hadih/OneDrive/Desktop/NXP/MRFE6VS25N_Level1_Rev1_DK//circuit/models/fsl_MRFE6VS25N_pkg_netlists.net』で定義)31行目付近):`FSLRFPK_FET2_v1`は未定義のプリミティブデバイスです。 壊れていますか? これは要素ページです https://www.nxp.com/products/radio-frequency-rf/legacy-rf/legacy-rf-power/1-8-2000-mhz-25-w-50-v-wideband-rf-power-ldmos-transistors:MRFE6VS25N Re: ads model こんにちは、hadi3000さん。 良い一日! これは、単一の製品モデルを使う前にRF高出力モデルキットを取り付けていないことのようです。 https://www.nxp.com/products/rf/rf-high-power-models/models-for-ads-keysight-advanced-design-system:RF_HIGH_POWER_MODELS_KEYSIGHT 私たちのモデルは二つの部分で構成されています: RF高出力モデルキット 製品モデル設計キット デバイスのシミュレーションには、両方の部品が必要です。 すでに高出力モデルキットをインストールしている場合は、「 トラブルシューティングADSInstallation Problems 」を確認し、FSL_TECH_INCLUDE要素が最上層回路に存在しているか確認してください。 また、よくある設置エラーのセクションもこちらでご覧いただけます。 https://www.nxp.com/docs/en/companyinformation/OVERVIEW_MDL_ADS_DESIGN_KIT.pdf この情報がお役に立てば幸いです。他に何かご不明な点がありましたら、お気軽にお問い合わせください。 良い一日をお過ごしください。幸運を祈ります。
記事全体を表示
RT1064に関するパラレルRGB LCDインターフェースピンの質問 こんにちは、 間違っていたら訂正してください。私の考えではRT1064は2つのLCDインターフェースを備えています。 - 1つはGPIOバス上にあり、CLK/HSYNC/VSYNC信号と最大24ビットのデータ信号を備えています。 そして、 - SEMCバス上に設置された8/16ビットMPU/8080インターフェース用の別のもの 私はILI9341コントローラ付きのLCDモジュールを使っています。私の計画はテキストとアイコンを表示することで、動画やアニメーションは一切行いません。このデザインでは外部メモリは使っておらず、SEMCバスが利用可能です。 Q1。私のアプリケーションに最適な機関はどれでしょうか? Q2。SEMCバス上には、並列モードでILI9341とインターフェースするために必要な以下のピンが配置されています: - D/CX - WRX - RDX i.MXRT 106x Re: Parallel RGB LCD interface pins question on RT1064 こんにちは、 @batmat さん。 GPIOバスをベースにしていると言っているLCDモジュールは、ディスプレイの駆動専用に設計されたEnhanced LCD インターフェース(eLCDIF)モジュールです。 もう一つのモジュールはスマート外部メモリコントローラ(SEMC)で、特定のディスプレイの駆動に使えますが、その設計は外部メモリの駆動に特化しています。ただし、ほとんどの8080ベースのディスプレイは、このモジュールとFlexIOピンの機能を組み合わせることでSEMC機能も搭載されています。以下のアプリケーションがこの機能を説明しています:https://mcuxpresso.nxp.com/appcodehub?search=an-flexio_8080_rt1050 ILI9341のデータシートをざっと見たところ、このドライバはeLCDIFモジュールと互換性のあるRGBインターフェース、SEMCモジュールに対応した8080インターフェース、さらにはLPSPIモジュールで実装可能な3/4ラインSPIインターフェースなど、複数の種類のインターフェースをサポートしているようです。 とはいえ、最適な選択肢は、お客様の性能要件と利用可能なピン配置に合致するものでしょう。 SEMC信号に関しては、WRX(書き込み信号)とRDX(読み出し信号)はどちらも特定のFlexIOピンに定義されています。前述のアプリケーションノートの場合、それぞれFlexIO2_00とFlexIO2_01となります。D/CX信号は、データラインがデータを送信するかコマンド情報を送信するかを決定するためのレジスタ選択(RS)信号に相当します。 BR、 エドウィン。
記事全体を表示
i.MX 8M Mini SAI: BCLKが停止する前にI2Cコーデック制御を実行する場所(PREEMPT_RT) We are developing a system using an i.MX 8M Mini connected to an external audio codec (controlled via I2C) through SAI (I2S), running a kernel with the PREEMPT_RT configuration. We need to perform codec operations (I2C) before the I2S BCLK stops. Where would be the best place to insert this I2C handling? Re: i.MX 8M Mini SAI: Where to perform I2C codec control before BCLK stops (PREEMPT_RT) 最適な場所:FSL-SAI CPU DAIトリガー(STOP)が実行される前にASoCの停止パスに「必須実行」操作を配置してください。できればコーデック/コンポーネントのストップトリガーコールバック、またはCPUのDAI停止前に注文されたマシン-ドライバリンク/コンポーネントトリガーコールバックとして。 なぜか:8M Mini i.MX NXP fsl_sai_trigger()はFIFO DMA要求や割り込みを無効にし、その後fsl_sai_config_disable()を呼び出してFSL_SAI_CSR_TEREをクリアし、現在のフレームが完成するまで待つことで処理SNDRV_PCM_TRIGGER_STOP。マスターモードではSAIブロックをリセットします。それは、SAIによって生成されたBCLKが停止/無効化される時点です。i.MX8MM SAIドライバーはDAI操作で.trigger = fsl_sai_trigger、.hw_free = fsl_sai_hw_freeとして登録されているhw_freeため、「BCLKが停止する前に」という要件はすでに遅すぎます。 ボード固有のBSPハックでない限り、fsl_sai_trigger()の中にコーデックI2Cを直接追加することは避けるべきです。汎用CPU-DAIドライバーを1つのコーデック/ボードポリシーに結合させます。Linux/NXP ASoCの分割は、コーデック制御I/Oをコーデックドライバに、CPUインターフェース制御をプラットフォーム/CPU DAIドライバに保持することを意図しています。NXPのドキュメントでは、I2Cを経由したコーデック制御I/OをASoC DAI操作を通じてエクスポートするコーデック・ドライバ機能として説明しています。 2つの実用的な実装パターン: コーデック DAI .trigger() /コンポーネント .trigger() STOP 用 SNDRV_PCM_TRIGGER_STOP / SUSPEND / PAUSE_PUSH にコーデックレジスタ書き込みを追加します。 このコールバックが CPU DAI fsl_sai_trigger(STOP の前に実行されるようにしてください。 現在のASoCでは、デフォルトのストップオーダーはDAI -> コンポーネント->リンクであり、DAIの反復はCPUのDAIの次にコーデックDAIなので、CPUのDAIが先の場合はコーデックDAIトリガーが遅すぎる可能性があります。 コンポーネントトリガーを使い、保持/デフォルト停止順序を保持すると、コンポーネント停止はリンクコールバックの前、DAI後はデフォルト順序でのみ実行されます。あるいは、カーネルが対応しているならDAIリンクのtrigger_stop順序を適切に設定することもできます。 マシンドライバー snd_soc_ops.trigger()/ リンクトリガー 停止コマンド用に、マシンドライバの.trigger()にボード固有のコーデックI2Cシーケンスを入れます。 ASoCトリガーのご注文を使い、リンクレベルのストップがDAIストップの前に実行されるようにします。カーネルは、停止順序 Component -> DAI -> Link として文書化された SND_SOC_TRIGGER_ORDER_LDC を公開し、デフォルトの停止順序は DAI -> Component -> Link です。選択したコールバックを fsl_sai_trigger(STOP) の前に配置するように順序を選択してください。 シーケンスが一般的なコーデックの動作ではなく、ボード/システムのポリシーである場合、ここが最もクリーンな場所となることが多い。 重要なPREEMPT_RT:通常のI2C転送はタスクコンテキスト操作であり、カーネルI2Cのドキュメントによると、I2Cプロトコル操作はタスクコンテキストでのみ使用可能であり、特別な遅延シャットダウンケース向けにオプションのアトミック転送フックが用意されています。したがって、PCM/ASoCパスが非アトミックとして構成され、カーネル内でコールバックコンテキストが検証されている場合を除き、アトミックPCMトリガーパスからブロッキングI2Cを実行しないでください。トリガーパスがアトミックな場合は、より安全なアーキテクチャを使用してください。コーデックの状態を早めに準備するか、BCLKを連続/ゲート状態に後から維持するか、CPU DAIトリガーで生のI2Cを実行するのではなく、スリープ可能な順序付きストップパスに操作を移動してください。
記事全体を表示
SE051C2: all Secure Object operations return 0x6985 while GetRandom works over the same authenticate ## The problem in one line On an **SE051C2**, every command that touches the applet's object store returns **0x6985 (CONDITIONS NOT SATISFIED)** — while `GetRandom` succeeds on the *same* session, including over the armed Platform SCP03 channel. ## Our questions **Q1. Is this part in a "mandate platform SCP" / RESTRICTED / transport state?** Both of our samples are as-delivered, and one is factory-fresh. If SE051C2 ships with the object store locked until the Platform SCP03 keys are rotated off the NXP defaults, that would explain every observation below exactly. If so, what is the documented procedure to leave that state? **Q2. Do object operations require customer-key (rotated) Platform SCP03, rather than the default platform keys?** Our channel authenticates with the defaults and demonstrably carries traffic — but every object command over it is refused. **Q3. If Q1/Q2 are yes: how do we read UNIQUE_ID first?** This is a chicken-and-egg that blocks us completely. Our platform-key derivation takes the chip UID as its input, but `ReadObject(UNIQUE_ID)` is itself one of the refused commands. What is the intended order of operations on a fresh part? **Q4. Is there a GET DATA / GET STATUS we can issue that reports the applet's lifecycle / VC state?** Stateless commands *do* work for us, so if such a query exists we can confirm the part's state ourselves instead of guessing. **Q5. What makes THIS part refuse ordinary object creation, when it evidently works for others?** In the DeleteAll/0x6985 thread (m-p/1648349), step 1 was `Se05x_API_WriteUserID(... FACTORY_RESET ...)` returning **0x9000** — a WriteSecureObject succeeding on the default session with only platform SCP03. That is precisely the class of command that fails for us. So object writes are *not* inherently session-gated. Is the difference the variant/configuration (SE051C2 vs SE050), or the platform keys still being NXP defaults? **Q6. Is m-p/1716555 the same root cause?** There, another user reports `Se05x_API_WriteUserID` returning `SM_ERR_CONDITIONS_OF_USE_NOT_SATISFIED` — our exact symptom — and that question appears to have gone unanswered. **Q7. Does `kSE05x_ECCurve_NIST_P256` require an explicit `Se05x_API_CreateECCurve` on SE051C2, or is it built in?** (Minor — but we tried it, and even the CreateECCurve is refused.) ## What we measured | Check | Result | Meaning | |---|---|---| | `Se05x_API_SELECT` applet | **0x9000** | IoT applet selected | | `Se05x_API_GetRandom` (plain) | real entropy | session + transport work | | Platform SCP03 authenticate | **succeeds** | default key set matched | | **GetRandom OVER the SCP03 channel** | **succeeds, real entropy** | encrypt + C-MAC + decrypt verified | | Second wrapped command back-to-back | **succeeds** | command counter stays in sync | | `WriteECKey` NIST P-256 (generate) | **0x6985** | | | `WriteECKey` secp256k1 (import) | **0x6985** | `CreateCurve_secp256k1` IS called first | | `WriteECKey` Ed25519 (import) | **0x6985** | built-in curve, no CreateCurve needed | | `ReadObject(UNIQUE_ID)` | **0x6985** | no policy argument involved | | `WriteBinary_Ver` (with file policy) | **0x6985** | file objects fail too | | `CreateECCurve(NIST_P256)` | **0x6985** | even creating a curve is refused | | `CheckObjectExists` | **0x6985** | cannot even test for an object | **`GetRandom` is the only command that works.** Every object-store operation returns 0x6985 — on both samples, plain or SCP03-wrapped. ## Already ruled out by experiment 1. **Not the part.** A second, factory-fresh SE051C2 behaves identically. 2. **Not the transport or session.** SELECT returns 0x9000; GetRandom returns real entropy on the same session. 3. **Not a broken or missing Platform SCP03 channel.** Authenticate succeeds against the default key set and — decisively — a `GetRandom` issued **over the armed channel** returns real entropy, as does a second back-to-back (command counter in sync). Encrypt + C-MAC + response decrypt all verified. The failing object commands are carried by a channel we have proven functional. 4. **Not a missing key policy.** We passed a real `Se05xPolicy_t` (`ALLOW_SIGN|VERIFY|KA|READ|WRITE|GEN`, authID 0) to every `WriteECKey`. No change. (It could not explain the UNIQUE_ID read anyway — `ReadObject` takes no policy.) 5. **Not a missing curve.** `CreateCurve_secp256k1` is called before the secp256k1 import, Ed25519 is built in, and `Se05x_API_CreateECCurve(NIST_P256)` **also** returns 0x6985. 6. **Not command ordering.** Same 0x6985 whether issued on the plain session or on the authenticated SCP03 channel. 7. **Not the middleware auth build configuration.** Rebuilt with `SSS_HAVE_SE05X_AUTH_PLATFSCP03=1`, `SSS_HAVE_SE05X_AUTH_NONE=0` and `SSSFTR_SE05X_AuthSession=1` (they had been NONE / 0). No change. ## Environment * Part: **SE051C2** — two samples, one factory-fresh, identical behaviour * Host: STM32L562, bare-metal, TrustZone secure world, I2C1 @ 100 kHz, T=1 * Middleware: vendored NXP Plug & Trust `Se05x_API_*` over a custom `smCom_TransceiveRaw` transport (our own T=1 framing — SELECT and GetRandom prove it works). Full middleware, **not** nano-package. * Platform SCP03: NXP default keys; authenticate succeeds and carries traffic SE050 Re: SE051C2: all Secure Object operations return 0x6985 while GetRandom works over the same authenti Hi Kan, thanks for the quick reply. Yes — tested without platform SCP, and that's actually our normal case. Our object operations run before se051_scp03_open() is called, so they're already on a plain session, and they fail there. Arming platform SCP03 afterwards makes no difference — same 0x6985 either way. Here is the APDU log. Plain session, no SCP03 (CLA=0x80, no 0x04 secure-messaging bit; the response is a bare status word, not wrapped):     TX (11): 80 04 00 27 06 41 04 20 00 F0 30 RX ( 2): 69 85   That is CheckObjectExists (INS 04 MGMT, P2 27, TAG_1 objectID 0x2000F030) — a read-only existence test — refused with CONDITIONS NOT SATISFIED. The same 0x6985 comes back for every object-store command we try, any object ID: CheckObjectExists, WriteBinary_Ver (with file policy), WriteECKey (generate and import; P-256, secp256k1 with CreateCurve_secp256k1 first, and Ed25519), CreateECCurve(NIST_P256), and ReadObject(UNIQUE_ID). On that same plain session, these work fine: SELECT of the IoT applet → 0x9000 GetRandom → real entropy So the transport and applet selection are good; only object-store commands are refused. Question: what would make a factory-fresh SE051C2 refuse even CheckObjectExists on a plain session? We see identical behaviour on two samples, one brand new and never written to. Is there a GET DATA (or similar) query that reports the applet's lifecycle / configuration state? Stateless commands work for us, so we can run it right away and report back. Setup: SE051C2, STM32L562 bare-metal host, I2C 100 kHz, our own T=1 framing (SELECT and GetRandom prove it), full Plug & Trust middleware Se05x_API_*, not nano-package. Re: SE051C2: all Secure Object operations return 0x6985 while GetRandom works over the same authenti Hi @winetime , Did you try the same process without platformSCP enabled? SE051C doesn't require a mandate platform SCP by default. If you may share the APDU command log for this issue, we may check it further. Have a great day, Kan ------------------------------------------------------------------------------- Note: - If this post answers your question, please click the "Mark Correct" button. Thank you! - We are following threads for 7 weeks after the last post, later replies are ignored Please open a new thread and refer to the closed one, if you have a related question at a later point in time. ------------------------------------------------------------------------------- Re: SE051C2: all Secure Object operations return 0x6985 while GetRandom works over the same authenti Hi @Kan_Li  — closing this out. **It was our side, and the diagnosis was wrong from the start.** Posting the resolution in case it helps someone else.   The part is fine. Once I instrumented a whole-boot APDU trace instead of reading individual results, a clean power-up gave 83 APDUs with 80 of them 0x9000 — object creation, secp256k1 key generation, `ReadObject` and ECDSA signing all working. The only non-0x9000 responses were benign and already handled by our own code:   80 01 0B 04 CreateECCurve(secp256k1) -> 6985 curve already exists 80 01 61 00 WriteECKey -> 6A80 object exists, wrong type 80 04 00 27 CheckObjectExists -> 9000 80 04 00 28 DeleteSecureObject -> 9000 80 01 61 00 WriteECKey -> 9000 succeeds after the delete   **What I was actually looking at.** The SE was already in a wedged state when each of my test boots started, left there by an earlier session. Once wedged, *every* APDU returns 0x6985 — `GetRandom`, `GetVersion`, `GetFreeMemory` included — and the state survives an MCU reset, a T=1 interface reset, and a re-`SELECT` that itself returns 0x9000. Only removing power clears it. So every measurement I reported was of the wedge, not of a blocked feature, and my "GetRandom is the only command that works" and "GetVersion is refused" claims were both artifacts of that. Apologies for the noise.   For the record, on a healthy boot this part reports:   * `GetVersion` → `07 02 00 3F FF FF FF` — applet **7.2.0**, AppletConfig `0x3FFF` * `GetFreeMemory(PERSISTENT)` → `0x3E0C` = **15,884 bytes** free * Platform SCP03 authenticates on the default key set for **OEF 0005A8FA (SE051C)**   **One thing that may still be worth your comment**, since it is the part I do not understand and it has shipping implications for us:   While wedged, GP security-domain commands keep working — `80 50 00 00` INITIALIZE UPDATE and `84 82 33 00` EXTERNAL AUTHENTICATE both return 0x9000 — while the IoT applet refuses everything. Is there a documented applet error state with that shape, and is there any way to detect or clear it **without cutting power**? A deployed device cannot power-cycle its secure element independently, so if a host can drive the applet into this state we need to know how to get back out.   Thanks for the quick response earlier.
記事全体を表示
NXP RFEP24-300 schmatic I am working on a legacy system that uses a RFEP24-300. The biases and pwoer seem to come on but there seems to be no game. I would ike to trouble shoot the pallet but have no documents. Could I get a copy? Failing that, it may be that it was run without proper cooling. Is there a way to determine if the final stage is still working? Re: NXP RFEP24-300 schmatic Hello, Thank you for contacting us. Regarding your inquiry, please note that the RFEP24-300 has been discontinued and is no longer supported. We sincerely apologize for any inconvenience this may cause and appreciate your understanding.  Re: NXP RFEP24-300 schmatic Hello, The design package is still up even though the support isn't. Look under Design Resources on the RFEP24-300 product page, there's a zip filed under Printed Circuit Boards and Schematics, Rev 0, Jun 2018, free NXP account to download. Archived pages often hold onto their design files long after the part itself goes. Before you pin it on the final though, the pallet is 41.6 dB across three stages, so a dead pre-driver or driver looks the same from the output connector. The schematic gets you idle current per stage.
記事全体を表示
NXP S32g399ardb3 build issue i am trying to build BSP 46 for NXP s32g399ardb3 but i am getting an error. I have attached the error below Could you please let me know what the issue might be? abhi@abhi:~/fsl-auto-yocto-bsp$ bitbake fsl-image-auto Loading cache: 100% |########################################################################################################################################################################| Time: 0:00:01 Loaded 5814 entries from dependency cache. Parsing recipes: 100% |######################################################################################################################################################################| Time: 0:00:01 Parsing of 3705 .bb files complete (3704 cached, 1 parsed). 5817 targets, 626 skipped, 2 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "2.8.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "universal" TARGET_SYS = "aarch64-fsl-linux" MACHINE = "s32g399ardb3" DISTRO = "fsl-auto" DISTRO_VERSION = "46.0" TUNE_FEATURES = "aarch64 crc cortexa53 crypto" TARGET_FPU = "" meta meta-poky meta-yocto-bsp = "HEAD:ec220ae083dba35c279192b2249ad03fe238446e" meta-oe meta-multimedia meta-python meta-networking meta-gnome meta-filesystems meta-webserver meta-perl meta-xfce = "HEAD:e621da947048842109db1b4fd3917a02e0501aa2" meta-virtualization = "HEAD:af1db2042caf8021d767dce1b26c08b59b96f3d1" meta-security = "HEAD:bc865c5276c2ab4031229916e8d7c20148dfbac3" meta-freescale = "HEAD:62423c69631d7f7cffe2bd20997412d76caa94ef" meta-rust-bin = "HEAD:63d677de912551b8f5606ce459748532c6ae529d" meta-alb-bsp meta-alb-sdk = "HEAD:ff4d84b23d5887aaff3a18043e4322e9ee3fa7ab" Sstate summary: Wanted 2989 Local 1513 Mirrors 0 Missed 1476 Current 0 (50% match, 0% complete)############################################################################# | ETA: 0:00:00 Initialising tasks: 100% |###################################################################################################################################################################| Time: 0:00:05 NOTE: Executing Tasks ERROR: base-files-3.0.14-r0 do_package: Error executing a python function in exec_func_python() autogenerated: The stack trace of python calls that resulted in this exception/failure was: File: 'exec_func_python() autogenerated', lineno: 2, function: 0001: *** 0002:perform_packagecopy(d) 0003: File: '/home/abhi/fsl-auto-yocto-bsp/sources/poky/meta/classes-global/package.bbclass', lineno: 363, function: perform_packagecopy 0359: rpath_replace (dvar, d) 0360:} 0361:perform_packagecopy[cleandirs] = "${PKGD}" 0362:perform_packagecopy[dirs] = "${PKGD}" *** 0363: 0364:python populate_packages () { 0365: oe.package.populate_packages(d) 0366:} 0367:populate_packages[dirs] = "${D}" File: '/usr/lib/python3.10/subprocess.py', lineno: 421, function: check_output 0417: else: 0418: empty = b'' 0419: kwargs['input'] = empty 0420: *** 0421: return run(*popenargs, stdout=PIPE, timeout=timeout, check=True, 0422: **kwargs).stdout 0423: 0424: 0425:class CompletedProcess(object): File: '/usr/lib/python3.10/subprocess.py', lineno: 526, function: run 0522: # We don't call process.wait() as .__exit__ does that for us. 0523: raise 0524: retcode = process.poll() 0525: if check and retcode: *** 0526: raise CalledProcessError(retcode, process.args, 0527: output=stdout, stderr=stderr) 0528: return CompletedProcess(process.args, retcode, stdout, stderr) 0529: 0530: Exception: subprocess.CalledProcessError: Command 'tar --exclude=./sysroot-only -cf - -C /home/abhi/fsl-auto-yocto-bsp/build_s32g399ardb3/tmp/work/s32g399ardb3-fsl-linux/base-files/3.0.14/image -p -S . | tar -xf - -C /home/abhi/fsl-auto-yocto-bsp/build_s32g399ardb3/tmp/work/s32g399ardb3-fsl-linux/base-files/3.0.14/package' returned non-zero exit status 2. Subprocess output: got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path hostname couldn't allocate absolute path for 'hostname'. tar: ./etc/hostname: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path skel couldn't allocate absolute path for 'skel'. tar: ./etc/skel: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path skel couldn't allocate absolute path for 'skel'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path skel couldn't allocate absolute path for 'skel'. tar: ./etc/skel: Cannot mkdir: Bad address tar: ./etc/skel/.profile: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path skel couldn't allocate absolute path for 'skel'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path skel couldn't allocate absolute path for 'skel'. tar: ./etc/skel: Cannot mkdir: Bad address tar: ./etc/skel/.bashrc: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path host.conf couldn't allocate absolute path for 'host.conf'. tar: ./etc/host.conf: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path nsswitch.conf couldn't allocate absolute path for 'nsswitch.conf'. tar: ./etc/nsswitch.conf: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path hosts couldn't allocate absolute path for 'hosts'. tar: ./etc/hosts: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path shells couldn't allocate absolute path for 'shells'. tar: ./etc/shells: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path issue couldn't allocate absolute path for 'issue'. tar: ./etc/issue: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path mtab couldn't allocate absolute path for 'mtab'. tar: ./etc/mtab: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path default couldn't allocate absolute path for 'default'. tar: ./etc/default: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path motd couldn't allocate absolute path for 'motd'. tar: ./etc/motd: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path issue.net couldn't allocate absolute path for 'issue.net'. tar: ./etc/issue.net: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path profile couldn't allocate absolute path for 'profile'. tar: ./etc/profile: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path fstab couldn't allocate absolute path for 'fstab'. tar: ./etc/fstab: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path lib couldn't allocate absolute path for 'lib'. tar: ./var/lib: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path lib couldn't allocate absolute path for 'lib'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path lib couldn't allocate absolute path for 'lib'. tar: ./var/lib: Cannot mkdir: Bad address tar: ./var/lib/misc: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path log couldn't allocate absolute path for 'log'. tar: ./var/log: Cannot create symlink to ‘volatile/log’: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path lock couldn't allocate absolute path for 'lock'. tar: ./var/lock: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path run couldn't allocate absolute path for 'run'. tar: ./var/run: Cannot open: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path backups couldn't allocate absolute path for 'backups'. tar: ./var/backups: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path local couldn't allocate absolute path for 'local'. tar: ./var/local: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path tmp couldn't allocate absolute path for 'tmp'. tar: ./var/tmp: Cannot create symlink to ‘volatile/tmp’: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path volatile couldn't allocate absolute path for 'volatile'. tar: ./var/volatile: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path volatile couldn't allocate absolute path for 'volatile'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path volatile couldn't allocate absolute path for 'volatile'. tar: ./var/volatile: Cannot mkdir: Bad address tar: ./var/volatile/log: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path volatile couldn't allocate absolute path for 'volatile'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path volatile couldn't allocate absolute path for 'volatile'. tar: ./var/volatile: Cannot mkdir: Bad address tar: ./var/volatile/tmp: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path spool couldn't allocate absolute path for 'spool'. tar: ./var/spool: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path bin couldn't allocate absolute path for 'bin'. tar: ./usr/bin: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path lib couldn't allocate absolute path for 'lib'. tar: ./usr/lib: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path sbin couldn't allocate absolute path for 'sbin'. tar: ./usr/sbin: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path games couldn't allocate absolute path for 'games'. tar: ./usr/games: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/dict: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/misc: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/doc: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/doc/base-files-3.0.14: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/man: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/common-licenses: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/info: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path src couldn't allocate absolute path for 'src'. tar: ./usr/src: Cannot mkdir: Bad address tar: Exiting with failure status due to previous errors ERROR: Logfile of failure stored in: /home/abhi/fsl-auto-yocto-bsp/build_s32g399ardb3/tmp/work/s32g399ardb3-fsl-linux/base-files/3.0.14/temp/log.do_package.1528834 ERROR: Task (/home/abhi/fsl-auto-yocto-bsp/sources/poky/meta/recipes-core/base-files/base-files_3.0.14.bb:do_package) failed with exit code '1' ERROR: wayland-protocols-1.33-r0 do_package: Error executing a python function in exec_func_python() autogenerated: The stack trace of python calls that resulted in this exception/failure was: File: 'exec_func_python() autogenerated', lineno: 2, function: 0001: *** 0002:perform_packagecopy(d) 0003: File: '/home/abhi/fsl-auto-yocto-bsp/sources/poky/meta/classes-global/package.bbclass', lineno: 363, function: perform_packagecopy 0359: rpath_replace (dvar, d) 0360:} 0361:perform_packagecopy[cleandirs] = "${PKGD}" 0362:perform_packagecopy[dirs] = "${PKGD}" *** 0363: 0364:python populate_packages () { 0365: oe.package.populate_packages(d) 0366:} 0367:populate_packages[dirs] = "${D}" File: '/usr/lib/python3.10/subprocess.py', lineno: 421, function: check_output 0417: else: 0418: empty = b'' 0419: kwargs['input'] = empty 0420: *** 0421: return run(*popenargs, stdout=PIPE, timeout=timeout, check=True, 0422: **kwargs).stdout 0423: 0424: 0425:class CompletedProcess(object): File: '/usr/lib/python3.10/subprocess.py', lineno: 526, function: run 0522: # We don't call process.wait() as .__exit__ does that for us. 0523: raise 0524: retcode = process.poll() 0525: if check and retcode: *** 0526: raise CalledProcessError(retcode, process.args, 0527: output=stdout, stderr=stderr) 0528: return CompletedProcess(process.args, retcode, stdout, stderr) 0529: 0530: Exception: subprocess.CalledProcessError: Command 'tar --exclude=./sysroot-only -cf - -C /home/abhi/fsl-auto-yocto-bsp/build_s32g399ardb3/tmp/work/all-fsl-linux/wayland-protocols/1.33/image -p -S . | tar -xf - -C /home/abhi/fsl-auto-yocto-bsp/build_s32g399ardb3/tmp/work/all-fsl-linux/wayland-protocols/1.33/package' returned non-zero exit status 2. Subprocess output: got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/cursor-shape: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/cursor-shape/cursor-shape-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/single-pixel-buffer: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/single-pixel-buffer/single-pixel-buffer-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/ext-foreign-toplevel-list: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/ext-foreign-toplevel-list/ext-foreign-toplevel-list-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/content-type: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/content-type/content-type-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/fractional-scale: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/fractional-scale/fractional-scale-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/xdg-activation: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/xdg-activation/xdg-activation-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/tearing-control: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/tearing-control/tearing-control-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/ext-session-lock: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/ext-session-lock/ext-session-lock-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/ext-idle-notify: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/ext-idle-notify/ext-idle-notify-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/ext-transient-seat: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/ext-transient-seat/ext-transient-seat-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/security-context: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/security-context/security-context-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/drm-lease: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/drm-lease/drm-lease-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/xwayland-shell: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/staging/xwayland-shell/xwayland-shell-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/linux-explicit-synchronization: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/linux-explicit-synchronization/linux-explicit-synchronization-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/keyboard-shortcuts-inhibit: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/keyboard-shortcuts-inhibit/keyboard-shortcuts-inhibit-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/input-method: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/input-method/input-method-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-shell: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-shell/xdg-shell-unstable-v6.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-shell/xdg-shell-unstable-v5.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/linux-dmabuf: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/linux-dmabuf/linux-dmabuf-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/fullscreen-shell: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/fullscreen-shell/fullscreen-shell-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/input-timestamps: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/input-timestamps/input-timestamps-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/relative-pointer: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/relative-pointer/relative-pointer-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/pointer-constraints: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/pointer-constraints/pointer-constraints-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-foreign: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-foreign/xdg-foreign-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-foreign/xdg-foreign-unstable-v2.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xwayland-keyboard-grab: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xwayland-keyboard-grab/xwayland-keyboard-grab-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-output: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-output/xdg-output-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/pointer-gestures: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/pointer-gestures/pointer-gestures-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/text-input: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/text-input/text-input-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/text-input/text-input-unstable-v3.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/primary-selection: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/primary-selection/primary-selection-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/idle-inhibit: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/idle-inhibit/idle-inhibit-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-decoration: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/xdg-decoration/xdg-decoration-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/tablet: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/tablet/tablet-unstable-v2.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/unstable/tablet/tablet-unstable-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/stable: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/stable/xdg-shell: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/stable/xdg-shell/xdg-shell.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/stable/linux-dmabuf: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/stable/linux-dmabuf/linux-dmabuf-v1.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/stable/presentation-time: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/stable/presentation-time/presentation-time.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/stable/viewporter: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/wayland-protocols/stable/viewporter/viewporter.xml: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/pkgconfig: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path share couldn't allocate absolute path for 'share'. tar: ./usr/share: Cannot mkdir: Bad address tar: ./usr/share/pkgconfig/wayland-protocols.pc: Cannot open: No such file or directory tar: Exiting with failure status due to previous errors ERROR: Logfile of failure stored in: /home/abhi/fsl-auto-yocto-bsp/build_s32g399ardb3/tmp/work/all-fsl-linux/wayland-protocols/1.33/temp/log.do_package.1532859 ERROR: Task (/home/abhi/fsl-auto-yocto-bsp/sources/poky/meta/recipes-graphics/wayland/wayland-protocols_1.33.bb:do_package) failed with exit code '1' NOTE: Tasks Summary: Attempted 1515 tasks of which 1237 didn't need to be rerun and 2 failed. Summary: 2 tasks failed: /home/abhi/fsl-auto-yocto-bsp/sources/poky/meta/recipes-core/base-files/base-files_3.0.14.bb:do_package log: /home/abhi/fsl-auto-yocto-bsp/build_s32g399ardb3/tmp/work/s32g399ardb3-fsl-linux/base-files/3.0.14/temp/log.do_package.1528834 /home/abhi/fsl-auto-yocto-bsp/sources/poky/meta/recipes-graphics/wayland/wayland-protocols_1.33.bb:do_package log: /home/abhi/fsl-auto-yocto-bsp/build_s32g399ardb3/tmp/work/all-fsl-linux/wayland-protocols/1.33/temp/log.do_package.1532859 Summary: There were 2 ERROR messages, returning a non-zero exit code. Re: NXP S32g399ardb3 build issue Hi,Abhiram_m_s Thank you for contacting us. Previous customers have encountered similar problems, please try to refer to the following link to solve this problem. Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. BR Joey
記事全体を表示
Issue with iMXRT1176DVMAA + Macronix MX25U51245G 54 flash Hi, working with a custom board and we need to change a functional flash for Macronix MX25U51245G 54 because of supply chain issues. I've had issues with what I suspect is the SFDP discovery using the bootloader ROM API. Custom PCBA using MIMXRT1176DVMAA Changed flash device from Winbond W25Q512NWEIQ to Macronix MX25U51245G 54 Using FlexSPI1 1V8 power Signal integrity within specifications Here is the schematics connection: achampoux_0-1785249761617.png achampoux_1-1785249804702.png By default, with the new flash, I can't perform write/erase operations properly using either the serial downloader or LinkServer. Reading the flash however seems to work. I was able to properly write/read/erase on the new flash by modifying example project evkbmimxrt1170_flexspi_nor_polling_transfer_cm7 from SDK 25.12.00 to run on RAM (TCM) and changing only tcustomLUT in board/hardware_init.c. Here is the LUT in question: const uint32_t customLUT[CUSTOM_LUT_LENGTH] = { [4 * NOR_CMD_LUT_SEQ_IDX_READ_NORMAL] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x03, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x20 ), [4 * NOR_CMD_LUT_SEQ_IDX_READ_NORMAL + 1] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0 ), [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x0B, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x20 ), [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST + 1] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_DUMMY_SDR, kFLEXSPI_1PAD, 0x0A, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04 ), [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0xEB, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_4PAD, 0x20 ), [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD + 1] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_DUMMY_SDR, kFLEXSPI_4PAD, 0x0A, kFLEXSPI_Command_READ_SDR, kFLEXSPI_4PAD, 0x04 ), [4 * NOR_CMD_LUT_SEQ_IDX_WRITEENABLE] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x06, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0 ), [4 * NOR_CMD_LUT_SEQ_IDX_ERASESECTOR] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x20, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x20 ), [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_SINGLE] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x02, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x20 ), [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_SINGLE + 1] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_WRITE_SDR, kFLEXSPI_1PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0 ), [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x38, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_4PAD, 0x20 ), [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD + 1] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_WRITE_SDR, kFLEXSPI_4PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0 ), [4 * NOR_CMD_LUT_SEQ_IDX_READID] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x9F, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x03 ), [4 * NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x01, kFLEXSPI_Command_WRITE_SDR, kFLEXSPI_1PAD, 0x02 ), [4 * NOR_CMD_LUT_SEQ_IDX_READSTATUSREG] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x05, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x01 ), [4 * NOR_CMD_LUT_SEQ_IDX_ERASECHIP] = FLEXSPI_LUT_SEQ( kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0xC7, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0 ), }; Are there known issues with this flash device and the bootloader API or SFDP discovery? Re: Issue with iMXRT1176DVMAA + Macronix MX25U51245G 54 flash Hi @achampoux , Thanks for your interest in NXP MIMXRT series! I checked the datasheet for the Flash chip you're using (MX25U51245G 54) and found that it appears to have some unique features. Most importantly: 4-Byte Address Mode permanent  I suspect that the LUT automatically generated by flashloader may not be using the 4-byte address mode. I recommend that you check this by looking at the fsl_romapi project in SDK.  ROM_FLEXSPI_NorFlash_GetConfig(instance, &norConfig, &option);   Next, retrieve norConfig and check its value. If this is indeed the issue, you’ll need to use a custom FCB header directly in serial download mode instead of the one generated by the tool. When downloading via the debugger, you’ll need to use a custom download algorithm.   Best regards, Gavin
記事全体を表示
真人龙虎斗线上开户注册网址 首先浏览器打网址【XS 950 8.C0M】或者     腾龙TL12568.COM 联系方式 薇【——15 70 88 35 56 8——】   24小时在线客服🐧【411205487】 进入页面“点击上方绿色按钮”填写一个自己需要账号、:然后再填写容易记住密码即可注册
記事全体を表示
ライブドラゴンタイガーゲームのオンライン登録ウェブサイト まず、ブラウザにURL【XS 950 8.C0M】またはTL12568.COMを入力してください。 連絡先情報:WeChat [-15 70 88 35 56 8-] 24時間オンラインカスタマーサービス🐧【411205487】 ページにアクセスし、上部にある緑色のボタンをクリックし、希望するアカウント名を入力してから、覚えやすいパスワードを入力して登録してください。
記事全体を表示
NXP S32g399ardb3 のビルドに関する問題 NXP s32g399ardb3 用の BSP 46 をビルドしようとしていますが、エラーが発生します。以下に誤りを添付しました 問題が何か教えてもらえますか? abhi@abhi:~/FSL-車載-Yocto-bsp$ bitbake FSL-image-車載 ロードキャッシュ:100% |########################################################################################################################################################################| Time: 0:00:01 Loaded 5814 entries from dependency cache. Parsing recipes: 100% |######################################################################################################################################################################|時間:0:00:01 3705 .bbの解析ファイルがすべて揃いました(キャッシュ済み3704個、解析済み1個)。ターゲット数5817、スキップ数626、マスク数2、エラー数0。 注:不足しているタスクキューの依存関係を解決します ビルド構成: BB_VERSION = "2.8.0" BUILD_SYS = "x86_64-Linux" NATIVELSBSTRING = "ユニバーサル" TARGET_SYS = "aarch64-fsl-Linux" MACHINE = "s32g399ardb3" ディストリビューション = "fsl-車載" DISTRO_VERSION = "46.0" TUNE_FEATURES = 「aarch64 crc cortexa53 crypto」 TARGET_FPU = "" メタ メタ・ポーキー meta-Yocto-bsp = "HEAD:ec220ae083dba35c279192b2249ad03fe238446e" メタOE メタマルチメディア メタパイソン メタネットワーキング メタノーム メタファイルシステム メタウェブサーバー メタパール meta-xfce = "HEAD:e621da947048842109db1b4fd3917a02e0501aa2" meta-仮想化 = "HEAD:af1db2042caf8021d767dce1b26c08b59b96f3d1" meta-セキュリティ = "HEAD:bc865c5276c2ab4031229916e8d7c20148dfbac3" meta-freescale = "HEAD:62423c69631d7f7cffe2bd20997412d76caa94ef" meta-rust-bin = "HEAD:63d677de912551b8f5606ce459748532c6ae529d" メタアルブ BSP meta-alb-SDK = "HEAD:ff4d84b23d5887aaff3a18043e4322e9ee3fa7ab" Sstate の概要: 指名手配 2989 ローカル 1513 ミラー 0 見逃し 1476 現在 0 (一致率 50%、完了率 0%)########################################################################### ## | ETA: 0:00:00 Initialising tasks: 100% |## ####################################################################################################################################################################################################################| 時間: 0:00:05 注:タスクの実行 エラー: base-files-3.0.14-r0 do_package: exec_func_python() で Python 関数を実行中にエラーが発生しました (自動生成): この例外/失敗を引き起こしたPython呼び出しのスタックトレースは以下の通りです: ファイル: 'exec_func_python() autogenerated', lineno: 2, function: 0001: *** 0002:perform_パッケージcopy(d) 0003: ファイル: '/ホーム/abhi/fsl-車載-Yocto-bsp/sources/poky/meta/classes-global/パッケージ.bbclass', lineno: 363, function: perform_パッケージcopy 0359: rpath_replace (dvar, d) 0360:} 0361:perform_パッケージcopy[cleandirs] = "${PKGD}" 0362:perform_パッケージcopy[指揮] = "${PKGD}" *** 0363: 0364:Python populate_パッケージ () { 0365: oe.パッケージ.populate_パッケージ(d) 0366:} 0367:populate_packages[dirs] = " ${D} " ファイル: '/usr/lib/python3.10/subprocess.py'、行番号: 421、関数: check_output 0417: それ以外の場合: 0418: 空 = b'' 0419: kwargs['input'] = 空 0420: *** 0421: return run(*popenargs, stdout=PIPE, timeout=timeout, check=True, 0422: **kwargs).stdout 0423: 0424: 0425:class CompletedProcess(object): ファイル: '/usr/lib/python3.10/subprocess.py'、行番号: 526、関数: 実行 0522: # process.wait() は呼び出しませんとして。 __exit__それは私たちのためにやってくれる。 0523: 上げる 0524: retcode = process.poll() 0525: チェックして戻りコードを取得する場合: *** 0526: raise CalledProcessError(retcode, process.args, 0527: 出力=標準出力、標準エラー=標準エラー) 0528: return CompletedProcess(process.args, retcode, stdout, stderr) 0529: 0530: 例外: subprocess.CalledProcessError: コマンド 'tar --exclude=./sysroot-only'-cf - -C /ホーム/abhi/fsl-車載-yocto-bsp/build_s32g399ardb3/tmp/work/s32g399ardb3-fsl-linux/base-files/3.0.14/image -p -S .|tar -xf - -C /ホーム/abhi/fsl-車載-Yocto-bsp/build_s32g399ardb3/tmp/work/s32G399ardB3-FSL-Linux/base-files/3.0.14/package' はゼロでない終了ステータス2を返しました。 サブプロセスの出力: 不明なディレクトリ、fd 4 に対して *at() システムコールが呼び出されました fd 4 の不明なベースパス、パスホスト名 'hostname' の絶対パスを割り当てることができませんでした。 tar: ./etc/hostname:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パススケル 「スケル」に絶対的な経路を割り当てることができませんでした。 tar: ./etc/skel:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パススケル 「スケル」に絶対的な経路を割り当てることができませんでした。 不明なディレクトリ、fd 4 に対して *at() システムコールが呼び出されました fd 4 の不明なベースパス、パススケルトン 'skel' の絶対パスを割り当てられませんでした。 tar: ./etc/skel:Cannot mkdir: 悪いアドレス tar: ./etc/skel/.profile:開けられない:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パススケル 「スケル」に絶対的な経路を割り当てることができませんでした。 不明なディレクトリ、fd 4 に対して *at() システムコールが呼び出されました fd 4 の不明なベースパス、パススケルトン 'skel' の絶対パスを割り当てられませんでした。 tar: ./etc/skel:Cannot mkdir: 悪いアドレス tar: ./etc/skel/.bashrc:開けられない:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスhost.conf 'host.conf' の絶対パスを割り当てられませんでした。 tar: ./etc/host.conf: 開けられない: アドレスが悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスNSswitch.conf 'nsswitch.conf' の絶対パスを割り当てられませんでした。 tar: ./etc/nsswitch.conf:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスホスト 「ホスト」に絶対的な経路を割り当てることができませんでした。 tar: ./etc/hosts:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基底経路、パスシェル 「砲弾」に絶対経路を割り当てることができませんでした。 tar: ./etc/shells:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスの問題 「問題」の絶対的な経路を割り当てることができませんでした。 tar: ./etc/issue:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスMTAB 「MTAB」の絶対経路を割り当てることができませんでした。 tar: ./etc/mtab:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスデフォルト 「デフォルト」の絶対パスを割り当てられませんでした。 tar: ./etc/default:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基道、パスMODT 『MODD』の絶対的な経路を割り当てることができませんでした。 tar: ./etc/motd:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基地経路、経路 issue.net 'issue.net' の絶対パスを割り当てられませんでした。 tar: ./etc/issue.net:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基線パス、パスプロファイル 「プロファイル」の絶対パスを割り当てられませんでした。 tar: ./etc/profile:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスFSTAB 「FSTAB」の絶対パスを割り当てることができませんでした。 tar: ./etc/fstab:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基底パス、パスライブラリ 「リベラル」に絶対的な道を割り当てることができませんでした。 tar: ./var/lib:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基底パス、パスライブラリ 「リベラル」に絶対的な道を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基底パス、パスライブラリ 「リベラル」に絶対的な道を割り当てることができませんでした。 tar: ./var/lib:Cannot mkdir: 悪いアドレス tar: ./var/lib/misc:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基線経路、経路記録 「log」に絶対パスを割り当てることができませんでした。 tar: ./var/log:'volatile/log'へのシンモリンクを作成できません:アドレスが悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスロック 「ロック」の絶対経路を割り当てることができませんでした。 tar: ./var/lock:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基地経路、経路走行 「走る」ための絶対的な経路を割り当てられなかった。 tar: ./var/run:開けられない:住所が悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基地経路、経路バックアップ 「バックアップ」に絶対的な経路を割り当てることができませんでした。 tar: ./var/backups:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスローカル 「ローカル」に絶対的な経路を割り当てることができませんでした。 tar: ./var/local:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基底経路、経路TMP 「TMP」の絶対経路を割り当てられませんでした。 tar: ./var/tmp:「volatile/tmp」へのシンプレリックリンクを作成できません:アドレスが悪い 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスボラタイル 「不安定」に絶対的な経路を割り当てることができなかった。 tar: ./var/volatile:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスボラタイル 「不安定」に絶対的な経路を割り当てることができなかった。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスボラタイル 「不安定」に絶対的な経路を割り当てることができなかった。 tar: ./var/volatile:Cannot mkdir: 悪いアドレス タール:./VAR/揮発性/ログ:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスボラタイル 「不安定」に絶対的な経路を割り当てることができなかった。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスボラタイル 「不安定」に絶対的な経路を割り当てることができなかった。 tar: ./var/volatile:Cannot mkdir: 悪いアドレス TAR:./VAR/Volatile/TMP:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基底経路、経路スプール 「スプール」の絶対経路を割り当てられませんでした。 tar: ./var/spool:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスビン 「bin」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/bin:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基線経路、経路には以下が含まれます 「インクルーク」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/include:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基底パス、パスライブラリ 「リベラル」に絶対的な道を割り当てることができませんでした。 tar: ./usr/lib:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知の基底パス、パスSBIN 「sbin」に絶対的な経路を割り当てることができませんでした。 tar: ./usr/sbin:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、Path Games 『ゲーム』に絶対的な道を割り当てることができませんでした。 tar: ./usr/games:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/DICT:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/MISC:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/doc:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/doc/base-files-3.0.14:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス タール:./USR/シェア/男:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/share/common-licenses:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/info:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パスSRC 「SRC」に絶対的な経路を割り当てることができませんでした。 tar: ./usr/src:Cannot mkdir: 悪いアドレス tar:過去のエラーにより故障状態で退出 エラー:故障ログファイルは以下のフォルダに保存されています:/ホーム/abhi/fsl-車載-Yocto-bsp/build_s32g399ardb3/tmp/work/s32g399ardb3-fsl-Linux/base-files/3.0.14/temp/log.do_package.1528834 エラー:タスク(/home/abhi/fsl-auto-yocto-bsp/sources/poky/meta/recipes-core/base-files/base-files_3.0.14.bb:do_package)が終了コード「1」で失敗しました エラー: wayland-protocols-1.33-r0 do_package: exec_func_python()でpython関数を実行する際にエラーが発生します。自動生成: この例外/失敗を引き起こしたPython呼び出しのスタックトレースは以下の通りです: ファイル: 'exec_func_python() autogenerated', lineno: 2, function: 0001: *** 0002:perform_パッケージcopy(d) 0003: ファイル: '/ホーム/abhi/fsl-車載-Yocto-bsp/sources/poky/meta/classes-global/パッケージ.bbclass', lineno: 363, function: perform_パッケージcopy 0359: rpath_replace (dvar, d) 0360:} 0361:perform_パッケージcopy[cleandirs] = "${PKGD}" 0362:perform_パッケージcopy[指揮] = "${PKGD}" *** 0363: 0364:Python populate_パッケージ () { 0365: oe.パッケージ.populate_パッケージ(d) 0366:} 0367:populate_packages[dirs] = " ${D} " ファイル: '/usr/lib/python3.10/subprocess.py'、行番号: 421、関数: check_output 0417: それ以外の場合: 0418: 空 = b'' 0419: kwargs['input'] = 空 0420: *** 0421: return run(*popenargs, stdout=PIPE, timeout=timeout, check=True, 0422: **kwargs).stdout 0423: 0424: 0425:class CompletedProcess(object): ファイル: '/usr/lib/python3.10/subprocess.py'、行番号: 526、関数: 実行 0522: # process.wait() は呼び出しませんとして。 __exit__それは私たちのためにやってくれる。 0523: 上げる 0524: retcode = process.poll() 0525: チェックして戻りコードを取得する場合: *** 0526: raise CalledProcessError(retcode, process.args, 0527: 出力=標準出力、標準エラー=標準エラー) 0528: return CompletedProcess(process.args, retcode, stdout, stderr) 0529: 0530: 例外: subprocess.CalledProcessError: コマンド 'tar --exclude=./sysroot-only'-cf - -C /home/abhi/fsl-auto-yocto-bsp/build_s32g399ardb3/tmp/work/all-fsl-linux/wayland-protocols/1.33/image-p -S 。|tar -xf - -C /ホーム/abhi/fsl-車載-Yocto-bsp/build_s32g399ardb3/tmp/work/all-fsl-Linux/wayland-protocols/1.33/package'ゼロ以外の終了ステータス2を返しました。 サブプロセスの出力: 不明なディレクトリ、fd 4 に対して *at() システムコールが呼び出されました fd 4 の不明なベースパス、パス共有 「share」の絶対パスを割り当てられませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-Protocols:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-Protocols/ステージング:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/cursor-shape:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/cursor-shape/cursor-shape-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/Wayland-protocols/Staging/single-pixel-buffer:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/single-pixel-buffer/single-pixel-buffer-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/share/Wayland-protocols/staging/ext-foreign-toplevel-list:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/ext-foreign-toplevel-list/ext-foreign-toplevel-list-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Staging/content-type:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/content-type/content-type-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/SHARE/Wayland-Protocols/Staging/fractional-scale:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/fractional-scale/fractional-scale-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Staging/XDG-activation:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/xdg-activation/xdg-activation-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-Protocols/staging/tearing-control:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/tearing-control/tearing-control-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/ext-session-lock:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/ext-session-lock/ext-session-lock-v1.xml: 開けられない:そのようなファイルやディレクトリが存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Staging/ext-Idle-Notify:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/ext-idle-notify/ext-idle-notify-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/SHARE/Wayland-protocols/Staging/ext-Transient-SEAT:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/ext-transient-seat/ext-transient-seat-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/share/Wayland-protocols/staging/セキュリティ-context:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/セキュリティ-context/security-context-v1.xml: 開けられない:そのようなファイルやディレクトリが存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Staging/DRM-lease:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/drm-lease/drm-lease-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Staging/Xwayland-Shell:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/staging/xwayland-shell/xwayland-shell-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-Protocols/Unstable:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Unstable/Linux-explicit-synchronization:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/linux-explicit-synchronization/linux-explicit-synchronization-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/keyboard-shortcuts-inhibit:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/keyboard-shortcuts-inhibit/keyboard-shortcuts-inhibit-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリが存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/input-方法:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/input-方法/input-方法-unstable-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Unstable/XDG-shell:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/xdg-shell/xdg-shell-unstable-v6.xml: 開けられない:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/xdg-shell/xdg-shell-unstable-v5.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/linux-dmabuf:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/linux-dmabuf/linux-dmabuf-unstable-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/fullscreen-shell:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/fullscreen-shell/fullscreen-shell-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリが存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/input-timestamps:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/input-timestamps/input-timestamps-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Unstable/Relative-Pointer:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/relative-pointer/relative-pointer-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリが存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/pointer-constraints:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/pointer-constraints/pointer-constraints-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリが存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Unstable/XDG-Foreign:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/xdg-foreign/xdg-foreign-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/xdg-foreign/xdg-foreign-unstable-v2.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/xwayland-keyboard-grab:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/xwayland-button-grab/xwayland-keyboard-grab-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Unstable/XDG-output:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/xdg-output/xdg-output-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/pointer-gestures:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/pointer-gestures/pointer-gestures-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/share/Wayland-protocols/Unstable/text-input:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/text-input/text-input-unstable-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/text-input/text-input-unstable-v3.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-Protocols/Unstable/primary-selection:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/primary-selection/primary-selection-unstable-v1.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Unstable/Idle-Inhibit:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/idle-inhibit/idle-inhibit-unstable-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/xdg-decoration:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/xdg-decoration/xdg-decoration-unstable-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Unstable/Tablet:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/tablet/tablet-unstable-v2.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/unstable/tablet/tablet-unstable-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-Protocols/Stable:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Stable/XDG-Shell:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/stable/xdg-shell/xdg-shell.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/stable/linux-dmabuf:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/stable/linux-dmabuf/linux-dmabuf-v1.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス TAR: ./USR/Share/Wayland-protocols/Stable/presentation-time:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/stable/presentation-time/presentation-time.xml: 開けられない:そのようなファイルやディレクトリは存在しない 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/stable/viewporter:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/wayland-protocols/stable/viewporter/viewporter.xml: 開けません:そのようなファイルやディレクトリはありません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/pkgconfig:Cannot mkdir:そのようなファイルやディレクトリは存在しません 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 未知ディレクトリの*at() syscallを取得、fd 4 FD 4の未知のベースパス、パス共有 「シェア」の絶対的な経路を割り当てることができませんでした。 tar: ./usr/share:Cannot mkdir: 悪いアドレス tar: ./usr/share/pkgconfig/wayland-protocols.pc: 開けられない: そのようなファイルやディレクトリは存在しない tar:過去のエラーにより故障状態で退出 エラー:故障ログファイルは以下のファイルに保存されています:/ホーム/abhi/fsl-車載-Yocto-bsp/build_s32g399ardb3/tmp/work/all-fsl-Linux/wayland-protocols/1.33/temp/log.do_package.1532859 エラー:タスク(/ホーム/abhi/fsl-車載-Yocto-bsp/sources/poky/meta/recipes-graphics/wayland/wayland-protocols_1.33.bb:do_package)が終了コード「1」で失敗しました 注:タスク概要:1515件のタスクを試み、そのうち1237件は再実行不要、2件は失敗しました。 概要:2つの課題が失敗: /ホーム/abhi/fsl-車載-Yocto-bsp/sources/poky/meta/recipes-core/base-files/base-files_3.0.14.bb:do_package ログ: /ホーム/abhi/FSL-車載-Yocto-bsp/build_s32g399ardb3/tmp/work/s32G399ardb3-FSL-Linux/base-files/3.0.14/temp/log.do_package.1528834 /ホーム/abhi/fsl-車載-Yocto-bsp/sources/poky/meta/recipes-graphics/wayland/wayland-protocols_1.33.bb:do_package ログ: /ホーム/abhi/FSL-車載-Yocto-bsp/build_s32g399ardb3/tmp/work/all-FSL-Linux/Wayland-protocols/1.33/temp/log.do_package.1532859 概要:2件のエラーメッセージが発生し、ゼロ以外の終了コードが返されました。 Re: NXP S32g399ardb3 build issue こんにちは、 Abhiram_m_s お問い合わせいただきありがとうございます。 以前のお客様も同様の問題に直面していますので、以下のリンクを参照してこの問題を解決してください。 BSP46とlinux-libc-headers 6.6の組み合わせでコンパイル失敗が発生します。 BR ジョーイ
記事全体を表示