Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. The compilation logs are attached below. Please advise on how to resolve this issue. DEBUG: Executing python function extend_recipe_sysroot NOTE: Direct dependencies are ['/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-devtools/quilt/quilt-native_0.67.bb:do_populate_sysroot', 'virtual:native:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-devtools/bison/bison_3.8.2.bb:do_populate_sysroot', 'virtual:native:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-devtools/dwarfsrcfiles/dwarfsrcfiles.bb:do_populate_sysroot', 'virtual:native:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot', 'virtual:native:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-devtools/pkgconfig/pkgconfig_git.bb:do_populate_sysroot', 'virtual:native:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot', 'virtual:native:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-devtools/rpm/rpm_4.19.1.1.bb:do_populate_sysroot', 'virtual:native:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-devtools/rsync/rsync_3.2.7.bb:do_populate_sysroot', 'virtual:native:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-devtools/unifdef/unifdef_2.12.bb:do_populate_sysroot', 'virtual:native:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/recipes-extended/xz/xz_5.4.7.bb:do_populate_sysroot'] NOTE: Installed into sysroot: ['cmake-native', 'openssl-native', 'expat-native', 'ncurses-native', 'readline-native', 'util-linux-libuuid-native', 'dwarfsrcfiles-native', 'elfutils-native', 'file-native', 'libedit-native', 'lua-native', 'make-native', 'perl-native', 'python3-native', 'rpm-native', 'bzip2-native', 'libarchive-native', 'libidn2-native', 'libnsl2-native', 'libtirpc-native', 'lzlib-native', 'zstd-native', 'curl-native', 'gdbm-native', 'gmp-native', 'gnutls-native', 'libtasn1-native', 'libcap-native', 'libffi-native', 'libgcrypt-native', 'libgpg-error-native', 'libmicrohttpd-native', 'libunistring-native', 'nettle-native'] NOTE: Skipping as already exists in sysroot: ['gettext-minimal-native', 'libtool-native', 'm4-native', 'quilt-native', 'texinfo-dummy-native', 'zlib-native', 'bison-native', 'flex-native', 'gnu-config-native', 'patch-native', 'pkgconfig-native', 'pseudo-native', 'rsync-native', 'unifdef-native', 'xz-native', 'acl-native', 'attr-native', 'popt-native', 'sqlite3-native'] DEBUG: sed -e 's:^[^/]*/:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/work/cortexa53-crypto-fsl-linux/linux-libc-headers/6.6/recipe-sysroot-native/:g' /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/openssl-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/ncurses-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/elfutils-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/lua-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/perl-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/python3-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/rpm-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/curl-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/gmp-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/libgcrypt-native/fixmepath /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/libgpg-error-native/fixmepath | xargs sed -i -e 's:FIXMESTAGINGDIRTARGET:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/work/cortexa53-crypto-fsl-linux/linux-libc-headers/6.6/recipe-sysroot:g; s:FIXMESTAGINGDIRHOST:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/work/cortexa53-crypto-fsl-linux/linux-libc-headers/6.6/recipe-sysroot-native:g' -e 's:FIXME_PSEUDO_SYSROOT:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/sysroots-components/x86_64/pseudo-native:g' -e 's:FIXME_HOSTTOOLS_DIR:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/hosttools:g' -e 's:FIXME_PKGDATA_DIR:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/pkgdata/s32g399avmcu2.1asc:g' -e 's:FIXME_PSEUDO_LOCALSTATEDIR:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/work/cortexa53-crypto-fsl-linux/linux-libc-headers/6.6/pseudo/:g' -e 's:FIXME_LOGFIFO:/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/work/cortexa53-crypto-fsl-linux/linux-libc-headers/6.6/temp/fifo.4087696:g' DEBUG: Python function extend_recipe_sysroot finished DEBUG: Executing python function sstate_task_prefunc DEBUG: Python function sstate_task_prefunc finished DEBUG: Executing python function do_package DEBUG: Executing python function package_setup_pkgv DEBUG: Python function package_setup_pkgv finished DEBUG: Executing python function package_convert_pr_autoinc DEBUG: Python function package_convert_pr_autoinc finished DEBUG: Executing python function package_prepare_pkgdata NOTE: Installed into pkgdata-sysroot: [] DEBUG: Python function package_prepare_pkgdata finished DEBUG: Executing python function perform_packagecopy ERROR: Error executing a python function in exec_func_python() autogenerated: The stack trace of python calls that resulted in this exception/failure was: File: 'exec_func_python() autogenerated', lineno: 2, function: 0001: *** 0002:perform_packagecopy(d) 0003: File: '/home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/sources/poky/meta/classes-global/package.bbclass', lineno: 363, function: perform_packagecopy 0359: rpath_replace (dvar, d) 0360:} 0361:perform_packagecopy[cleandirs] = "${PKGD}" 0362:perform_packagecopy[dirs] = "${PKGD}" *** 0363: 0364:python populate_packages () { 0365: oe.package.populate_packages(d) 0366:} 0367:populate_packages[dirs] = "${D}" File: '/usr/lib/python3.10/subprocess.py', lineno: 421, function: check_output 0417: else: 0418: empty = b'' 0419: kwargs['input'] = empty 0420: *** 0421: return run(*popenargs, stdout=PIPE, timeout=timeout, check=True, 0422: **kwargs).stdout 0423: 0424: 0425:class CompletedProcess(object): File: '/usr/lib/python3.10/subprocess.py', lineno: 526, function: run 0522: # We don't call process.wait() as .__exit__ does that for us. 0523: raise 0524: retcode = process.poll() 0525: if check and retcode: *** 0526: raise CalledProcessError(retcode, process.args, 0527: output=stdout, stderr=stderr) 0528: return CompletedProcess(process.args, retcode, stdout, stderr) 0529: 0530: Exception: subprocess.CalledProcessError: Command 'tar --exclude=./sysroot-only -cf - -C /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/work/cortexa53-crypto-fsl-linux/linux-libc-headers/6.6/image -p -S . | tar -xf - -C /home/ubuntu/develop_bsp46/sw-prj-SDV_HPC_Linux_s32g399a/build_s32g399avmcu2.1asc/tmp/work/cortexa53-crypto-fsl-linux/linux-libc-headers/6.6/package' returned non-zero exit status 2. Subprocess output: got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address tar: ./usr/include/misc: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address tar: ./usr/include/misc/ocxl.h: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address tar: ./usr/include/misc/pvpanic.h: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address tar: ./usr/include/misc/xilinx_sdfec.h: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address tar: ./usr/include/misc/cxl.h: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address tar: ./usr/include/misc/fastrpc.h: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address tar: ./usr/include/misc/uacce: Cannot mkdir: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. tar: ./usr/include: Cannot mkdir: Bad address tar: ./usr/include/misc/uacce/uacce.h: Cannot open: No such file or directory got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path include couldn't allocate absolute path for 'include'. Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Okay, thank you very much. Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hi, @zhijie
Thanks for your reply.
I have reproduced the issue, it does not related with current BSP, but from the building system changes
I am looking into it and will reply you later once any progress made?
BR
Chenyin
Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Thanks， @zhijie
Could you also help to share the result of uname -a?
BR
Chenyin Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hello, @zhijie
Thanks for your post.
May I know the details of your building environment?
It is the first time you built the BSP46? or previously it is correct?
BR
Chenyin Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hi @zhijie I am also facing the same issue, if you ressolved it kindly let us know. ERROR: zlib-1.3.1-r0 do_package: Error executing a python function in exec_func_python() autogenerated: The stack trace of python calls that resulted in this exception/failure was: File: 'exec_func_python() autogenerated', lineno: 2, function: 0001: *** 0002:perform_packagecopy(d) 0003: File: '/home/smurugan8/LWT/sources/poky/meta/classes-global/package.bbclass', lineno: 363, function: perform_packagecopy 0359: rpath_replace (dvar, d) 0360:} 0361:perform_packagecopy[cleandirs] = "${PKGD}" 0362:perform_packagecopy[dirs] = "${PKGD}" *** 0363: 0364:python populate_packages () { 0365: oe.package.populate_packages(d) 0366:} 0367:populate_packages[dirs] = "${D}" File: '/usr/lib/python3.12/subprocess.py', lineno: 466, function: check_output 0462: else: 0463: empty = b'' 0464: kwargs['input'] = empty 0465: *** 0466: return run(*popenargs, stdout=PIPE, timeout=timeout, check=True, 0467: **kwargs).stdout 0468: 0469: 0470:class CompletedProcess(object): File: '/usr/lib/python3.12/subprocess.py', lineno: 571, function: run 0567: # We don't call process.wait() as .__exit__ does that for us. 0568: raise 0569: retcode = process.poll() 0570: if check and retcode: *** 0571: raise CalledProcessError(retcode, process.args, 0572: output=stdout, stderr=stderr) 0573: return CompletedProcess(process.args, retcode, stdout, stderr) 0574: 0575: Exception: subprocess.CalledProcessError: Command 'tar --exclude=./sysroot-only -cf - -C /home/smurugan8/LWT/build/tmp/work/armv8a-poky-linux/zlib/1.3.1/image -p -S . | tar -xf - -C /home/smurugan8/LWT/build/tmp/work/armv8a-poky-linux/zlib/1.3.1/package' returned non-zero exit status 2. Subprocess output: got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path lib couldn't allocate absolute path for 'lib'. tar: ./usr/lib: Cannot mkdir: Bad address got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path lib couldn't allocate absolute path for 'lib'. got *at() syscall for unknown directory, fd 4 unknown base path for fd 4, path lib couldn't allocate absolute path for 'lib'. tar: ./usr/lib: Cannot mkdir: Bad address tar: ./usr/lib/libz.so.1: Cannot create symlink to ‘libz.so.1.3.1’: No such file or directory Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hello chenyin： Is there any update on this build failure issue? Wait for good news, much appreciated. BR Zhijie Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hello Chenyin The problem is resolved, Thanks! BR Zhijie Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hello, @zhijie
Thanks for your reply
By checking the logs of the building failure, it seems related with the program changes of the building machine. Would you mind trying the following way? On your ubuntu PC, use the command "sudo apt install tar=1.34+dfsg-1build3" to make a change of tar version used, the clean the BSP and rebuild it again
BR
Chenyin
Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. I was having the same issue and I've figured out the issue is with the tar version build 4 and the downgrading did resolve the error, but the actual issue is the tar and pseudo using openat2() instead of openat for the system call. The poky has already given the patch as far as I've seen, does the NXP has any update on it? I'm currently using LLDP 6.1.22 SDK on the LX2160ARDB_REV2 Board and the same error appears when i try to build rcw using bitbake. If NXP has upated the pseudo_git.bb to use openat2() instead of openat() as per tar's latest build 4., it will be useful for us as we can update tar to the latest version. Attached the logs for your reference. The bug from yocto-project link is added here https://bugzilla.yoctoproject.org/show_bug.cgi?id=16117 Regards, PVSN Subhash Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hello, @pvsnsubhash
Thanks for your reply, after my workaround fix for the issue, I had also noticed the pseudo issue and then reported it to our internal team.
The corresponding team would review the issue and arrange the schedule for the formal fix.
Thanks again for your valuable inputs.
BR
Chenyin Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hello, @Sanjiv_Mns
Thanks for your reply.
1. OK, I understand you are currently using i.MX instead of S32G products
2. You may have a try with the following method:
"sudo apt install tar=1.34+dfsg-1build3" and then clean/rebuild with your Yocto setup
3. If still issues, I suggest waiting for the feedback from your original link, I believe my colleague would help you to solve it based on you i.MX setup
BR
Chenyin
Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hi @chenyin_h Have you found anything that could help resolve it? This issue is currently blocking our progress, We would really appreciate any update or guidance you can provide. Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. The issue is because of the tar package in linux getting upgraded to build4 from build3. Downgrade the tar package using the below steps and hold the apt upgrade for that package for now and proceed with your compilation. wget http://archive.ubuntu.com/ubuntu/pool/main/t/tar/tar_1.34+dfsg-1build3_amd64.deb sudo dpkg -i tar_1.34+dfsg-1build3_amd64.deb sudo apt-mark hold tar After the above steps, you can proceed with your compilation and no such errors will be seen. Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hi @chenyin_h I am still facing the same issue. I have already raised a query on the forum, but I haven't received any response yet.Link I am attaching the log below for your reference. Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. Hello, @Sanjiv_Mns
Thanks for your reply.
May I know if you met the same issue? would you mind creating a new post with your details logs, we would directly support it ASAP.
BR
Chenyin Re: Compilation failure occurs with BSP46 paired with linux-libc-headers 6.6. I solved this issue in NXP iMX BSP 6.6.36-2.1.0 and 6.12.49-2.2.0 bumping the pseudo_git.bb to 1.9.5 and updating the older-glibc-symbols patch... both copied from the corresponding wrynose recipe (6.18.20-2.0.0). git diff... diff --git a/meta/recipes-devtools/pseudo/files/older-glibc-symbols.patch b/meta/recipes-devtools/pseudo/files/older-glibc-symbols.patch index c453b5f735..f42b32b8d9 100644 --- a/meta/recipes-devtools/pseudo/files/older-glibc-symbols.patch +++ b/meta/recipes-devtools/pseudo/files/older-glibc-symbols.patch @@ -28,10 +28,10 @@ diff --git a/Makefile.in b/Makefile.in @@ -120,7 +120,7 @@ $(PSEUDODB): pseudodb.o $(SHOBJS) $(DBOBJS) pseudo_ipc.o | $(BIN) libpseudo: $(LIBPSEUDO) - $(LIBPSEUDO): $(WRAPOBJS) pseudo_client.o pseudo_ipc.o $(SHOBJS) | $(LIB) + $(LIBPSEUDO): $(WRAPOBJS) pseudo_client.o pseudo_client_scanf.o pseudo_ipc.o $(SHOBJS) | $(LIB) - $(CC) $(CFLAGS) $(CFLAGS_PSEUDO) -shared -o $(LIBPSEUDO) \ + $(CC) $(CFLAGS) -Lprebuilt/$(shell uname -m)-linux/lib/ $(CFLAGS_PSEUDO) -shared -o $(LIBPSEUDO) \ - pseudo_client.o pseudo_ipc.o \ + pseudo_client.o pseudo_client_scanf.o pseudo_ipc.o \ $(WRAPOBJS) $(SHOBJS) $(LDFLAGS) $(CLIENT_LDFLAGS) diff --git a/pseudo_wrappers.c b/pseudo_wrappers.c diff --git a/meta/recipes-devtools/pseudo/pseudo_git.bb b/meta/recipes-devtools/pseudo/pseudo_git.bb index 5f32b3777a..c491f0c97f 100644 --- a/meta/recipes-devtools/pseudo/pseudo_git.bb +++ b/meta/recipes-devtools/pseudo/pseudo_git.bb @@ -1,8 +1,6 @@ require pseudo.inc SRC_URI = "git://git.yoctoproject.org/pseudo;branch=master;protocol=https \ - file://0001-configure-Prune-PIE-flags.patch \ - file://glibc238.patch \ file://fallback-passwd \ file://fallback-group \ " @@ -14,9 +12,9 @@@ SRC_URI:append:class-nativesdk = " file://older-glibc-symbols.patch" SRC_URI[prebuilt.sha256sum] = "ed9f456856e9d86359f169f46a70ad7be4190d6040282b84c8d97b99072485aa" -SRCREV = "e11ae91da7d0711f5e33ea9dfbf1875dde3c1734" +SRCREV = "0bad85523ff71f1a84cea5fdf72e7f560c4aeed4" S = "${WORKDIR}/git" -PV = "1.9.0+git" +PV = "1.9.5+git" # largefile and 64bit time_t support adds these macros via compiler flags globally # remove them for pseudo since pseudo intercepts some of the functions which will be
記事全体を表示
