So, you are new to CodeWarrior and don't know how to register the Development Suite you got? It is not complicated at all, I'll explain briefly   There is no need of extra information or documents you must keep handy, only the stuff you are already familiar with like your account username and password, the CodeWarrior suite you acquired and the product ID that can be found (physically) on a sticker at the back of the product or (digitally) in the "View my Orders" section of your home page.   The next steps are basically following the lead in the registration process thru the webpage, providing the information of the product and submiting the request.   There is also a part of the process in which you must enter the information in the cmd, but don't panic! It's just matter of locating and synchroinizing files so you don't have any complication when using the IDE.   This video here can show you complete details and guide you step by step with the registration process   This document was generated from the following discussion: HOW TO register CodeWarrior? ~

1. Download service manager. License Manger for Windows https://www.nxp.com/webapp/sps/download/license.jsp?colCode=CWX-FLEX-LMWIN-V1-4&location=null LMTOOLS https://www.nxp.com/webapp/sps/download/license.jsp?colCode=LMTOOLS_X64_64BIT_WIN   Installation Guide https://www.nxp.com/docs/en/brochure/FLTLICINSTWINBR.pdf  2. License Manger update If your license manager have the following view, an update is needed. Updated License Manager view In the previous links the updated License Manager can be downloaded. 3. Open LM Tools / Go to Config Services tab  Service Name: Please type a new service name. Service Name: Please type a new service name. Path to the license: select the location of the license file. Path to log file: create a file to save the log file from server. Uncheck Start Server at power-up. Check Use Service. 4. Open Start/Stop/Reread tab Select the new created service and click on reread License file. Check on the license status on the low left side of the windows. License read successfully is expected. 5. License path information Review the license.dat file in in the installation path location. Make sure you have the same copy that holds the server, so the serve information referenced in license.dat file can be the same. Classic CodeWarrior IDE, save the license.dat file in the directory where you installed the software (usually C:\Program Files\NXP\Code Warrior for XYZ\). Eclipse IDE, save the license.dat file in the directory where you installed the software (usually C:\Program Files\NXP\CW XYZ v10.x\XZY\license.dat). CodeWarrior for Networking C:\Freescale\CW4NET_v2018.01\Common  6. How to set an environment variable  Go to System within control panel. Click on advanced system settings. Go to Environment Variables. Look for METROWKS_LICENSE_FILE – if there is no variable please click on add. Assign value to for client Classic CodeWarrior IDE, save the license.dat file in the directory where you installed the software (usually C:\Program Files\NXP\Code Warrior for XYZ\). Close and test

There is a broken link on the web site, this happens when trying to enter to your SW from the view order site.    Error  The workaround for this is to access thru SW Licensing and Support view, log to www.nxp.com in go to the home site.         this broken link will be fixed early September. 

How To purchase your support renewal for multi-seat Software .   Order the appropriate part number from the chart below. Renewal for Perpetual Licenses CWT-BASIC ($195) CWT-STANDARD ($495) CWT-PRO ($995) Annual Subscription* Renewal CWA-BASIC-R ($395) CWA-STANDARD-R ($995) CWA-PRO-R ($1995)      2. Identify the number of seats your Registration Id has.           2.1 Log to Freescale.com            2.2 Click On Software Licensing & Support           2.3 Click On Order History on Software & Support           2.4 Locate  your Registration Code and Check Additional Details           2.5 Available Quantity will define the number of Seats needed to renew your Software.          3.     On shopping Cart match the Quantity to the available quantity and update your basket.        4.     Complete  your purchasing process      5.      When you receive your physically shipped renewal certificate or digital e-mail confirmation, go to www.freescale.com/activation.      6.     Enter the registration code for your support renewal.      7.     Select the parent suite to which your support renewal will apply. Only Software with the number of seats matching the renewal part will appear.               8.     Once selected, the Registration Confirmation screen will appear, showing that the upgrade was successfully registered.

Quick guide on how to generte a license with a new host information. ## codewarrior‌ #rehost‌ #codewarrior license‌

New Web license system – Registering your physical shipment Software and Support contracts. Physical Shipment parts for software and support contracts can be registered following the next steps For Software: Locate the Entitlement ID/ Registration ID  in the received shipment card or DVD case. Go to www.freescale.com/activation . (If you have not already registered, it will be necessary to do so at this time) Enter Registration Code and Click Register Product >> Add Product to an Account Confirmation page should appear.   For support Contracts: Locate the Entitlement ID/ Registration ID  in the received shipment card or DVD case. Go to www.freescale.com/activation . (If you have not already registered, it will be necessary to do so at this time) Enter Registration Code and Click Register Product >> Add Product to an Account Complete the Support Form and Click Submit>>, which will provide us with the details and contact information to complete  your support environment Once this is completed our support team will contact you.

Online installer This image contains the CW MCU v10.5 core tools and an installer, which assumes your computer has internet access. During the installation process the core tools will be installed and you will be asked to select the Freescale architecture support you want installed. The installer will automatically access the internet, download the necessary archives and install them in your CodeWarrior directory. Click here to start the download. This archive size is 400 MB. Offline installer This image contains the complete CW MCU v10.5 tool suite and an installer, which assumes your computer does NOT have internet access. All data needed by the installer will be downloaded now and no other download will be performed. Click here to start the download. The total archive size is 1.3 GB Note: The Evaluation Edition license is automatically installed with your product and you do not need to register it. This license allows you to develop projects as Professional Edition within the 30-day evaluation period. After 30 days, the license works as Special Edition license (free permanent, but feature limited) which supports unlimited assembly code; up to 64KB of C code for ColdFire+, V1 ColdFire, DSC, Kinetis L Series, RS08, S08 derivatives; up to 128KB of C code for Kinetis K Series and V2-V4 ColdFire derivatives; and up to 512KB for Qorivva and PX derivatives.   Note: The Special Edition license is automatically installed with your product and you do not need to register it. This license allows you to develop projects with unlimited assembly code; up to 64KB of C code for ColdFire+, V1 ColdFire, DSC, Kinetis L Series, RS08, S08 derivatives; up to 128KB of C code for Kinetis K Series and V2-V4 ColdFire derivatives; and up to 512KB for Qorivva and PX derivatives.   This document was generated from the following discussion: What is the difference between the Offline and the Online Installer for MCU 10.5

If you have been invited to Join a Software account follow the process attached to complete the invitation.   Regards.

This document, is a short guide for the installation of USB Dongle Drivers and explain how  to generate a license. #usb dongle‌ dongle #license manager‌ #floating license‌ #license issues‌

Dongle drivers for Win 7 or Win 10 working with eclipse-based CodeWarrior versions.   How to install dongle drivers haspdinst Download and Extract in a know folder. Open CMD Go to extraction directory path Type haspdinst.exe -? Type haspdinst.exe -install  C:\Users\n760\Downloads\dongle11.16.0.0_v6\x64_n6\FLEXID9_Windows_v7_80_x64>haspdist.exe -install Operative System supported Windows 7 SP1 Windows 7 SP1 Embedded standard (x86) Windows 8.1 SP1 Windows Server 2008 R2 SP1 Windows Server 2012 R2 Windows Server 2016 Windows 10 Version 1709

this document guide user  to install floating license with Step By Step Screenshots. It's very simple and readable.

These are CodeWarrior Licensing Community Document list:   Web License System: New Web license system - December 8th, 2014 & Problems with Freescale Account. New Web license system - Registering your physical shipment Software and Support contracts. How to download a Service Pack / Patch / Update from Web License System?   Register and Purchase: How to register and retrieve CodeWarrior suite licenses How to complete a Software Activation Share Account Invite. Are you getting an Error that your registration code does not exist? How to extend my evaluation license file for CodeWarrior   Renewal: How to apply renewal code on registration? How to renew support for CodeWarrior suite licenses How to purchase your support renewal for multi-seat software registration. How to renew MQX RTOS add-on SW IPv6 DL-MQXIPV6-SR-PS   Rehost: How to rehost CodeWarrior suite license Cannot Re-host a license - License Lists is empty  (valid to generate a license file associated to a registration too).   Floating License Related: How to install/check if my floating license file is running ? (known issues) Step Byt Step Screenshot Guide Floating license FlexLM for CodeWarrior.pdf   USB Dongle Related: How to install/use USBdongle license under Win 8.1? (Include test with CW for MPC55xx V2.7 & CW for HC12 v5.1) USBdongle license is not running for CW for PA V10.4 and MCU V10.4 (sometimes) ->  "LM_NOTTHISHOST"   Misc: How to merge multiple floating and NL license files in 1 file What is the difference between the Offline and the Online Installer for MCU 10.5   License FAQ: Licensing and Registration FAQ|NXP   More CodeWarrior Licensing Discussions: CodeWarrior Licensing Community

Guide to generate a license file for your software. #license issues‌ #codewarrior; software; licenses issue‌

Option A Multiple license generation 1. Login www.nxp.com 2. Click SW Licensing & Support 3. Select your account if you have multiple 4. Click on Order History , Find the entitlement you need and click 5. Go to licenses options 6. Check mark the license needed 7. Generate license file 8. Copy in the app folder C:\Freescale\CW4NET_v2016.01\Common Option B Multiple entitlement license generation, Files downloads 1. Login www.nxp.com 2. Click SW Licensing & Support 3. Click on the product list needed 4. Select the version you want to license or download 5. Go to license tab 6. Assig a host 7. Generate license 8. Copy in the app folder C:\Freescale\CW4NET_v2016.01\Common

1- For old development tools.   You can access then on the web site directly at the link:      CodeWarrior Downloads|Freescale   Under Legacy Updates and Patches you can download all patches for older versions   Example for HCS12 16-bit MCUs v5.0     2- For last/current development tools   As explained in the Legacy Updates and Patches: If any legacy update/patches are needed for versions not listed below please access your Licensing portal and click on the "Previews tab" after selecting the suite you like to use.   Under Secure Applications click on Software License and support   Select a registration   Select a Product HC12 v5.1 for instance   Click on I Agree if the needed and you will have access to all service packs, patches and other updates available for this tool version.   Attached you will find       - a video showing you the process,       - the information in a word doc.      

-Software Licensing and Support feature that show license and entitlements expiration dates, and help searching license files. #licese‌ #codewarrior; software; licenses issue‌  

Freescale customer license management web page was changed since Dec, 2014.     This document introduced How to rehost CodeWarrior suite license( Node-Lock and Floating License) .

How to merge several license files in 1 file?     I’ve created 2 videos showing/explaining how to generate a license file for several products in same time. The doc explains the process to: Download multiple NL license files for different products based on 1 registration Download multiple Floating license files for different products based on 1 registration and how to merge them in 1 file.     Note: If you have several floating registrations and want to merge the license files in one file, the process is similar to 2. You must copy all license files in 1 file and keep only the first 3 server lines. The other must be commented by adding a # as explained above.