Import Processor Data with Config Tools for i.MX v7

cancel
Showing results for 
Search instead for 
Did you mean: 

Import Processor Data with Config Tools for i.MX v7

Jump to solution
167 Views
NXT_Kazuma_Sasaki
Senior Contributor I

I am getting a config tool from following URL.

Config Tools for i.MX v7 Now Available 

My development PC can not connect to internet due to security policy.

therefore, I would like to import processor data from other PC.

I have successfully done processor data exporting as attached file.

But, I could not import these data. Could you please teach me procedures to import data?

(1) Importing procedure

I have tried according to following user guide.

pastedImage_2.png

(2) Error description

After import data, I've tried create a new configuration. but, I could not find any data on the window as shown in the capture below.

pastedImage_3.png

Best Regards,

Kazuma Sasaki.

Tags (1)
1 Solution
82 Views
nxf46838
NXP TechSupport
NXP TechSupport

Hello,

 

Please try to import them manually, unzip the file in the following folder:

C:\ProgramData\NXP\mcu_data_v7

 

Open config tool and the processor data should be available.

 

Hope this helps,

Best regards,

Aldo.

View solution in original post

0 Kudos
4 Replies
83 Views
nxf46838
NXP TechSupport
NXP TechSupport

Hello,

 

Please try to import them manually, unzip the file in the following folder:

C:\ProgramData\NXP\mcu_data_v7

 

Open config tool and the processor data should be available.

 

Hope this helps,

Best regards,

Aldo.

View solution in original post

0 Kudos
82 Views
NXT_Kazuma_Sasaki
Senior Contributor I

Dear Aldo,

I appreciate your support.

unzip the file in the following folder:

C:\nxp\i.MX_CFG_v7\mcu_data

<before unzip, following files stored.>

- resources

- offline_data.zip

<after unzip, following files stored.>

- resources

- offline_data.zip

- boards

- components

- processors

- ksdk2_0_info.xml

- npidata.mf

Unfortunately, I could not solve this issue by your workaround.

Should I need some more steps?

pastedImage_1.png

Best Regards,

Kazuma Sasaki.

0 Kudos
82 Views
nxf46838
NXP TechSupport
NXP TechSupport

Hello,

Yes, please note that it is a different folder, please try to unzip in the following folder:
C:\ProgramData\NXP\mcu_data_v7

Regards,

Aldo

0 Kudos
82 Views
NXT_Kazuma_Sasaki
Senior Contributor I

Dear Aldo,

I am sorry for my wrong operation.

Finally, I could import data correctly. Thank you so much.

pastedImage_1.png 

Best Regards,

Kazuma Sasaki.