I am not able to boot i.MX6 Quad custom board using SD card(SD4)

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

I am not able to boot i.MX6 Quad custom board using SD card(SD4)

837 次查看
rameshasp
Contributor IV

I am not able to boot i.MX6 Quad custom board using SD card(Port selection is SD4). could you please help me how bring up this device.

  • We were using eMMC instead of SD card in SD4 portal and eMMC was 8bit.
  •  Current version has SD card 4bit in SD4 portal.
  • SD card has CD/DATd.3 multiplexed pin.

So please help me to resolve and bring up this device.

Advance Thanks,

Ramesha S P

标签 (1)
标记 (1)
2 回复数

785 次查看
Bio_TICFSL
NXP TechSupport
NXP TechSupport

Hello Ramesha,

Check section 4.5.4 of your Linux User guide it show you how to boot form SD4 pin connection for MX6 and the boot settings.

Regards

785 次查看
rameshasp
Contributor IV

This information is very useful.

Thank you very much.

Ramesha S P

0 项奖励
回复