I want to use SWD download flash, but my HEX file combines code flash and data flash, when I use Multi Link Universal FX rev c to flash my hex file, Could data flash be downloaded to MCU? Could I use Multi Link Universal FX rev c to burn my HEX file on the production line? if yes, What is the burning tool? could you tell me ?
Solved! Go to Solution.
Hello @asd046012,
I would recommend contacting PE Micro support since Multilink is their product.
For example, this topic has been already discussed here:
https://www.pemicro.com/forums/forum.cfm?forum_topic_id=7429
But you should be able to load .hex from S32DS as well:
https://community.nxp.com/t5/S32-Design-Studio/How-to-download-hex-file/m-p/751824
Regards,
Daniel
Hello @asd046012,
I would recommend contacting PE Micro support since Multilink is their product.
For example, this topic has been already discussed here:
https://www.pemicro.com/forums/forum.cfm?forum_topic_id=7429
But you should be able to load .hex from S32DS as well:
https://community.nxp.com/t5/S32-Design-Studio/How-to-download-hex-file/m-p/751824
Regards,
Daniel