USB Type-C Active Cable

[#1]

• Overview
• Recommended Products
• Featured Videos
• Documentation
• Training
• Community Links

Overview

The USB Type-C allows multi-function signaling over the same connector. Our active cable application supports the connectivity of data, video, security, and power over a single connector. The active cables system for Type-C supports up to 10 Gbps. The MCU provides fundamental signal processing and management duties. It communicates with both the signal conditioner and USB PD PHY to organize signal traffic and power flow.

Interactive Block Diagram

Recommended Products

Category	Products
MCU	Kinetis® K Series: High-Performance Microcontrollers (MCUs) based on Arm® Cortex®-M4 Core | NXP
	LPC800 Series: Low-Cost Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Cores | NXP
Authentication	A1006 | Secure Authenticator IC: Embedded Security Platform | NXP
Signal Conditioners	SuperSpeed USB 3.0 redriver | NXP
	PTN36043A: USB Type-C SuperSpeed active switch | NXP
USB PD PHY	PTN5100 | NXP
	PTN5100D | NXP
	PTN5150 | NXP

Featured Videos

Link

NXP USB Type C | NXP

USB Type C Shield Board | NXP

NXP® End to End Secure USB Type-C Solution | NXP

Documentation

Link	Features
Paving The Way for USB Type-C Connectors	Delivering data, video, security, and power in one small, easy-to-insert connector, the new USB Type-C connector.
PTN5110N PD PHY application programming guide	PTN5110N is a 1-port TCPC (Type-C Port controller) compliant USB Power Delivery (PD) PHY IC

Training

Link

USB Type-C Overview - Part 1| Introduction to USB Type-C | NXP

Authentication for USB Type-C - Part 1 | Introduction to NXP Identification & Security | NXP

NXP USB Type-C Solution - Part 1| Overview of NXP Secure Interfaces & Power Solutions | NXP

Community Links

Link

Other NXP Products

Secure Authentication

Introduction to USB Type-C and Type-C Solutions from NXP

USB Type-C Overview

MHW-N1910 Authentication for USB Type-C