USDHC missing in config tool

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

USDHC missing in config tool

跳至解决方案
268 次查看
mttjcksn
Contributor II

I'm using the latest config tool and SDK to configure a project for the M7 core of the RT1176.

There is no USDHC driver available in the config tool.

Is this expected? It is very difficult to organise code nicely when the generated code is very self-contained but doesn't include all required peripherals.

 

Thanks

0 项奖励
回复
1 解答
163 次查看
mayliu1
NXP Employee
NXP Employee

Hi @mttjcksn ,

Thanks for your patience.

I check your issue with relevant Team. 

The USDHC support is unfortunately not planned, as we have limited bandwidth for supporting the large scope of SDK.

The SD access is part of the middleware so we suggest  you can have a look on the middleware examples related to that topic.

We apologize for any inconvenience caused.

Best Regards

MayLiu

在原帖中查看解决方案

0 项奖励
回复
3 回复数
211 次查看
mayliu1
NXP Employee
NXP Employee

Hi @mttjcksn ,

Thank you so much for your interest in our products and for using our community.

I import an SDK demo "evkbmimxrt1170_sdcard_freertos_cm7", in this demo, There is  USDHC driver available in the config tool.

mayliu1_1-1758524240100.png

 

IDE version: MCUXPresso IDE 25.6

SDK version: MIMXRT1170-EVKB 25.6

I think you can refer to this demo.

Wish it helps you.
If you still have question about it, please kindly let me know.

Best Regards

MayLiu

0 项奖励
回复
200 次查看
mttjcksn
Contributor II
Hi MayLiu, thanks for the reply. Your screenshot shows the pin configuration, I was referring to the peripheral driver. I don't see the peripheral listed in the peripheral view.

Many thanks
0 项奖励
回复
164 次查看
mayliu1
NXP Employee
NXP Employee

Hi @mttjcksn ,

Thanks for your patience.

I check your issue with relevant Team. 

The USDHC support is unfortunately not planned, as we have limited bandwidth for supporting the large scope of SDK.

The SD access is part of the middleware so we suggest  you can have a look on the middleware examples related to that topic.

We apologize for any inconvenience caused.

Best Regards

MayLiu

0 项奖励
回复