LPCOpen for LPC1769 and MCUXpresso or LPCExpresso

[paulisammalisto]

I have LPCXpresso board for LPC1769 and now I need SDK but I cannot find one for MCUXpresso and the link for LPCExpresso v2.07 does not work, "The system is currently unavailable."

[kk7xo]

How do I use LPCOpen for the LPC1769 with MCUXpresso for Visual Studio Code?

[Celeste_Liu]

Hello, the thread of this post has been closed. Please create a new case so that we can provide better support. 

[Celeste_Liu]

Hello @paulisammalisto ,

Thanks for your post.

The demo code for LPC1769 is integrated in LPCOpen. Please refer to the following webpage:  LPCOpen Libraries and Examples | NXP Semiconductors 

About how to use LPCOpen with  MCUXpresso, you can also refer to the following content: MCUXpresso IDE - Using LPCOpen Examples | NXP Semiconductors 

LPCOpen is already integrated in the MCUXpresso IDE. There is no need for additional downloads. All you need to do is:

1. Open MCUXpresso IDE, then open the project as shown in the figure below:

Celeste_Liu_5-1739930953713.png

2. Select "lpcopen_2_10_lpcxpresso_nxp_lpcxpresso_1769.zip". and then click "open".

Celeste_Liu_6-1739931069742.png

3. After the following interface appears, click "next".

Celeste_Liu_7-1739931121159.png

4.Finally, when the following interface appears, it's what you need.

Celeste_Liu_8-1739931174272.png

We hope the above information is useful to you.

BRs,

Celeste

---------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!
---------------------------------------------------------------------------------------------------------------------

[Dezheng_Tang]

https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools...

[paulisammalisto · Accepted solution]

OK, I got it  to work, also the link worked today.

Thank you.