LPCOpen for LPC1769 and MCUXpresso or LPCExpresso

[paulisammalisto]

I have LPCXpresso board for LPC1769 and now I need SDK but I cannot find one for MCUXpresso and the link for LPCExpresso v2.07 does not work, "The system is currently unavailable."

[kk7xo]

How do I use LPCOpen for the LPC1769 with MCUXpresso for Visual Studio Code?

[Celeste_Liu]

Hello, the thread of this post has been closed. Please create a new case so that we can provide better support. 

[Celeste_Liu]

Hello @paulisammalisto ,

Thanks for your post.

The demo code for LPC1769 is integrated in LPCOpen. Please refer to the following webpage:  LPCOpen Libraries and Examples | NXP Semiconductors 

About how to use LPCOpen with  MCUXpresso, you can also refer to the following content: MCUXpresso IDE - Using LPCOpen Examples | NXP Semiconductors 

LPCOpen is already integrated in the MCUXpresso IDE. There is no need for additional downloads. All you need to do is:

1. Open MCUXpresso IDE, then open the project as shown in the figure below:

2. Select "lpcopen_2_10_lpcxpresso_nxp_lpcxpresso_1769.zip". and then click "open".

3. After the following interface appears, click "next".

4.Finally, when the following interface appears, it's what you need.

We hope the above information is useful to you.

BRs,

Celeste

---------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!
---------------------------------------------------------------------------------------------------------------------

[Dezheng_Tang]

https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools...

[paulisammalisto · Accepted solution]

OK, I got it  to work, also the link worked today.

Thank you.