LPC18xx SSP configuration structure mismatch with user manual.

[Kushal_Panchal]

Hi,

In the User manual CR0 is 4byte same as mentioned in @file LPC18xx.h.
However the SSP configuration structure in @file lpc18xx_ssp.h takes 12 bytes for the CR0 bit setting.
Please find the attached images for your reference. 

Thanks,
Kushal

[daniel598lopez]

Hello @Kushal_Panchal,
Thank you for bringing this to our attention. It appears there's some discrepancy in the CR0 bit configuration between the user manual and the SSP configuration structure.

Please share the attached images so we can take a closer look and provide further assistance on this matter. 

Thanks, and looking forward to resolving this with you!

Best regards,
Daniel Lopez

[Kushal_Panchal]

Hi @daniel598lopez,

Please find the attached images again.

Let me know, if you need any other help.

Thanks,

Kushal

[Harry_Zhang]

Hi @Kushal_Panchal 

I checked the LPCOPEN 1850.

I just find the LPC18XX.h, but i didn't not find the lpc18xxssp.h.

May I ask which LPCopen package this file is in?

BR

Harry

[Kushal_Panchal]

Hi @Harry_Zhang 

Please find the below link.

https://github.com/openxc/nxp-cdl/blob/master/LPC18xxLib/inc/lpc18xx_ssp.h

Thanks,

Kushal

[Harry_Zhang · Accepted solution]

Hi @Kushal_Panchal 

Sorry, this is not the code we officially maintain.

BR

Harry

[Kushal_Panchal]

Hi @Harry_Zhang 

Thanks for the information.

Regards,

Kushal