I'm trying to write code for sending packets and receive back t via Ethernet. Before I never worked on Ethernet please could any one provide me sample code for above controller
You can try these options.
Option 1: examples for FNET TCP/IP Stack
all questions regarding FNET you can post here FNET - Embedded TCP/IP Stack download | SourceForge.net
Option 2: You can also check KSDK 1.3 with example for fsl_phy_driver,
HTTP Server Demo on lwIP TCP/IP Stack
Ping Demo on lwIP TCP/IP Stack
TCP Echo Demo on lwIP TCP/IP Stack
UDP Echo Demo lwIP TCP/IP Stackall questions regarding KSDK you can ask at Kinetis Software Development Kit
I hope this helps you.
In case of any questions, please let me know.
you must download the stack.
Please, go to website FNET Embedded TCP/IP Stack and click to download.
after downloading, please install FNET then see User Manual for Getting Started.
I hope this helps.
I downloaded, but the thing is I wanted to learn about UDP in that he has given ALL PROTOCOLS(telenet,ping,tcp...etc) and that too in only flash. I can't able to run it in debug mode. Please can you tell me how to understand UDP protocol from that file I'm facing difficulty to understand.