Topics with Label: lpc2000

Where to get LPC mcu ROHS report?

by on

0 Replies 4760 Views

0 Replies

4760 Views

If the LCD controller has a lower priority on the EMC bus, refreshes will be stalled. How noticable is this on the screen?

by on Latest post on by

1 Reply 3211 Views

1 Reply

3211 Views

Is the LPC1788 pin compatible with the LCP2478?

by on

0 Replies 2407 Views

0 Replies

2407 Views

How is the LPC2478 32-bit External Memory Controller different than the LPC1788 32-bit External Memory Controller?

by on Latest post on by

1 Reply 2913 Views

1 Reply

2913 Views

The datasheet mentions that the SCL0 and SDA0 pins require external pull-ups regardless of PINMODE / IOCONF / PINSEL configuration. But on SCL1, SDA1, SCL2, and SDA2 look to be able to use an internal pull-up ?

by on

0 Replies 2311 Views

0 Replies

2311 Views

What platforms are supported by LPCXpresso?

by on Latest post on by

1 Reply 3339 Views

1 Reply

3339 Views

The datasheet mentions the I/O pins are 5V tolerant if Vdd is present. Can you explain in detail what this implies?

by on

0 Replies 3036 Views

0 Replies

3036 Views

How to calculate the value of crystal load capacitors?

by on Latest post on by

2 Replies 180758 Views

2 Replies

180758 Views

After a software reset like WD reset, BOD reset, is the SRAM content retained?

by on Latest post on by

1 Reply 3170 Views

1 Reply

3170 Views

When using LPC23xx or LPC24xx Rev B silicon, the Ethernet worked fine, however, when we switched to Rev D silicon, the Ethernet interface is no longer working.

by on

0 Replies 2046 Views

0 Replies

2046 Views

How can I identify the Ethernet MAC ID to differentiate between 23xx/24xx/17xx?

by on

0 Replies 1801 Views

0 Replies

1801 Views

Are there Ethernet bootloaders available for LPC1700 and LPC2300/2400? If so, where can I find it?

by on

0 Replies 2031 Views

0 Replies

2031 Views

Will using a 16-bit external bus be too slow for LCD, causing tearing to occur?

by on

0 Replies 1981 Views

0 Replies

1981 Views

Is there dedicated on-board SRAM memory specifically for the frame buffer?

by on

0 Replies 1941 Views

0 Replies

1941 Views

Is the LCD DMA located in the LCD macrocell or the GP DMA ?

by on

0 Replies 1892 Views

0 Replies

1892 Views

Topics with Label: lpc2000

Topics with Label: lpc2000

Where to get LPC mcu ROHS report?

If the LCD controller has a lower priority on the EMC bus, refreshes will be stalled. How noticable is this on the screen?

Is the LPC1788 pin compatible with the LCP2478?

How is the LPC2478 32-bit External Memory Controller different than the LPC1788 32-bit External Memory Controller?

The datasheet mentions that the SCL0 and SDA0 pins require external pull-ups regardless of PINMODE / IOCONF / PINSEL configuration. But on SCL1, SDA1, SCL2, and SDA2 look to be able to use an internal pull-up ?

What platforms are supported by LPCXpresso?

The datasheet mentions the I/O pins are 5V tolerant if Vdd is present. Can you explain in detail what this implies?

How to calculate the value of crystal load capacitors?

After a software reset like WD reset, BOD reset, is the SRAM content retained?

When using LPC23xx or LPC24xx Rev B silicon, the Ethernet worked fine, however, when we switched to Rev D silicon, the Ethernet interface is no longer working.

How can I identify the Ethernet MAC ID to differentiate between 23xx/24xx/17xx?

Are there Ethernet bootloaders available for LPC1700 and LPC2300/2400? If so, where can I find it?

Will using a 16-bit external bus be too slow for LCD, causing tearing to occur?

Is there dedicated on-board SRAM memory specifically for the frame buffer?

Is the LCD DMA located in the LCD macrocell or the GP DMA ?

Do you have size limit or memory size calculator to help set the size of the frame buffer?

Are the LCD controller signals LVDS?

Is the LCD DMA a gather scatter DMA ? Where is it located exactly ?