带标签的主题： CAN

How can I verify the configured CAN bitrate, using an oscilloscope?

发帖者发帖时间

0 条回复 4653 次查看

0条回复

4653 次查看

The CAN controller goes into bus off mode when my application tries to send a CAN message. There is no activity on the CAN bus. Why?

发帖者发帖时间

0 条回复 4241 次查看

0条回复

4241 次查看

I see error frames on the CAN bus whenever my code starts up, before the CAN controller is initialized. What is a common reason for this?

发帖者发帖时间

0 条回复 5014 次查看

0条回复

5014 次查看

How can I test the CAN peripheral and driver without a CAN transceiver and CAN bus connected?

发帖者发帖时间

0 条回复 4752 次查看

0条回复

4752 次查看

Why does CAN0 work and CAN1 not work? Do I need another node to test my code?

发帖者发帖时间

0 条回复 5360 次查看

0条回复

5360 次查看

Can I wake up the part on CAN bus activity?

发帖者发帖时间

0 条回复 4793 次查看

0条回复

4793 次查看

What is the difference between error active and error passive?

发帖者发帖时间

0 条回复 12234 次查看

0条回复

12234 次查看

How do I detect there is no CAN bus connected?

发帖者发帖时间

0 条回复 2825 次查看

0条回复

2825 次查看

Can I send a message with X/Y/Z bits in the ID?

发帖者发帖时间

0 条回复 85416 次查看

0条回复

85416 次查看

How is the transmit error counter reset?

发帖者发帖时间

0 条回复 3146 次查看

0条回复

3146 次查看