自2026年2 月2日起,恩智浦MEMS传感器产品已转移至意法半导体。有关已转移产品的详细信息,请 参阅本页面。如需更多信息,请联系意法半导体。
Dear All,
I need to connect MPX5500 to PIC18F MCU so MCU has itself comparator or I can use separate op amp
What is the most suitable way to connect MPX5500 to MCU
Please help
Hi,
The MPX5500 is an integrated pressure sensor which means that the sensor is already Temperature Compensated, Calibrated and amplified internally, so the output of the sensor will be from 0 to 5.0V depending on the pressure applied.
The hardware needed to connect it to a MCU is minimal, you can find the recommended connection on Figure 4 of the datasheet: http://cache.freescale.com/files/sensors/doc/data_sheet/MPX5500.pdf
Regards,
Jose