Consecutive Reads

[admin]

Hi,

I'm using the MPL115A2 over the I2C bus. I need to know if the device supports consecutive read. I.e. If I write the address pointer to 0x00 and send a read command with 4 bytes worth of clock cycles( 4 x 9 clock pulses on the SCL line), will it send me pressure MSB, LSB, temperature MSB, and LSB?

Thanks.

Onkar Raut,

Embedded Systems Engineer,

BNS Solutions, Walpole, MA.

[TomasVaverka · Accepted solution]

Hi Onkar,

Yes, it will. The MPL115A2 does support a multiple-byte (burst) read.

Regards,

Tomas