Hi there,
On some tests seem that after a software reset (2ms of duration on RESET_b pin) the consecutive reboot happens 92 ms later (all GPIO in 3-state and no software running).
Executing a fault injection on a FCCU channel configured as "short reset", this time grows to more than 250 ms and FS26 triggers an unwanted destructive reset.
Why FCCU soft reset is so long?
where I Find these s32k reboot times, i don't find them in DS or RM.
Best Regards,
Fabio
Solved! Go to Solution.
Problem resolved !
Thank you
Fabio