S32K344 : PMIC[MFS2613] control source or example code

[JungkyuHan1]

S32K344 white board has equipted PMIC[MFS2613].

I'd like to get the SPI control source code[example code].

[Robin_Shen · Accepted solution]

Hi

Please note that during the Christmas holiday period, our support response times may be longer than usual. In some cases, your request might be addressed after the New Year. Thank you for your understanding.

Please download FS26 RTD by click S32K3 Standard Software -> Automotive SW - SBC/PMIC - Real Time Drivers -> SBC FS26 R21-11 5.0.0

Although these examples are not based on the S32K344-WB (note the difference in SPI pins), the accompanying S32K3 RTD is the relatively new RTD 6.0.0.

Or download the S32K344_Whiteboard_Example(LLD)_RTM_1.0.0.zip. Unfortunately, the S32K3 RTD version is quite old: S32K3_RTD_2_0_0_D2203
C:\NXP\S32K344_Whiteboard_Example(LLD)_RTM_1.0.0\S32K344_Whiteboard_Example(LLD)_RTM_1.0.0\s32k3_wb_fs26
C:\NXP\S32K344_Whiteboard_Example(LLD)_RTM_1.0.0\S32K344_Whiteboard_Example(LLD)_RTM_1.0.0\s32k3_wb_self_test

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

[JungkyuHan1]

Dear @Robin_Shen 

Thankyou for support.

I am afraid the Example file of you mentioned is EMPTY.

Please Check again. 

==============================================================

Or download the S32K344_Whiteboard_Example(LLD)_RTM_1.0.0.zip. Unfortunately, the S32K3 RTD version is quite old: S32K3_RTD_2_0_0_D2203

[Robin_Shen]

Please unzip this .zip file and then install the .exe file.

[JungkyuHan1]

Dear @Robin_Shen 

It looks All the codes are based on Tresos AUTOSAR.

Is there any Non Autosar base White board examples or PMIC SPI driver? 

[Robin_Shen]

Unfortunately, s32k3_wb_fs26 uses MCAL's Sbc_fs26 in the S32DS Peripherals Tool.

s32k3_wb_self_test does not use MCAL's Sbc_fs26 in the S32DS Peripherals Tool, but the project includes /s32k3_wb_self_test/ExternalDevices/FS26_Drv.

Alternatively, you can refer to Sbc_fs26_example_IP_S32K344 to see how to use Sbc_fs26_Ip in the S32DS Peripherals Tool.

[JungkyuHan1]

Dear @Robin_Shen 

Thank you for response.

I have tried to build WB_self_test but faced some errors and I have no idea how to fix it.

Please help.

[Robin_Shen]

If you choose Sbc_fs26 in MCAL, you need to configure the Spi in MCAL accordingly. Refer to Sbc_fs26_example_HLD_S32K344.
If you choose Sbc_fs26_Ip in Drivers, you need to configure the Lpspi in Drivers accordingly. Refer to Sbc_fs26_example_IP_S32K344.

[JungkyuHan1]

Here I attach my code. Please take a look.

[JungkyuHan1]

Dear @Robin_Shen 

I will check  Sbc_fs26_example_IP_S32K344 to see how to use Sbc_fs26_Ip

By the way , Where Can I get the code of [s32k3_wb_self_test]?