Calibration Software

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

Calibration Software

998 次查看
Vast-Horizon
Contributor II

Hello,

I have a S32K358BMU board. I wonder if NXP has a similar software for calibration like the one from OPEN ECU? https://openecu.com/product/openecu-calibrator/ 

To calibrate a thermistor with the board for example.

0 项奖励
回复
3 回复数

956 次查看
Senlent
NXP TechSupport
NXP TechSupport

Hi@Vast-Horizon

I looked at the implementation principle of "openecu", which is actually very similar to the FreeMASTER software tool we provide. You can take a look at the FreeMASTER software tool we provide to users.

https://www.nxp.com/design/design-center/software/development-software/freemaster-run-time-debugging...

 

0 项奖励
回复

938 次查看
Vast-Horizon
Contributor II

Good to know! I wonder if it's possible to apply a function to a raw signal before it is displayed on a graph in FreeMaster?

0 项奖励
回复

915 次查看
Senlent
NXP TechSupport
NXP TechSupport

Hi@Vast-Horizon

I have not used it this way, I usually directly observe the variables from the bottom layer.

You can go to this forum to ask whether FreeMASTER supports these features and how to use them.https://community.nxp.com/t5/FreeMASTER/bd-p/freemaster

 

0 项奖励
回复