Hello,
Just want to double-check my understanding: for data that's right-aligned, does the ADC resolution start at bit 14? So, essentially, bit 14 is always the Most Significant Bit (MSB) regardless of the resolution, right? I'm just curious about why bit 0 wasn't chosen as the Least Significant Bit (LSB). Any insights on the reasoning behind this? Thanks for helping out!
Best,
Vusal
Hi Vusal,
See Adc_Sar_Ip_GetConvData and Adc_Sar_GetMaskedResult. Your understanding is correct.
Sorry, I didn't find the reason for this design.
Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Hi Vusal,
See Adc_Sar_Ip_GetConvData and Adc_Sar_GetMaskedResult. Your understanding is correct.
Sorry, I didn't find the reason for this design.
Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
