S32G-VNP-RDB3 GMAC

[dongmin]

Hi, I'm doing Frame Preemption with GMAC with the S32G-VNP-RDB3 board, but I succeeded with 1G bps. But I'm going to change it to 10M bps, but I can't, so does the limit have to be 1G bps?

[alejandro_e]

Hello @dongmin,

Thanks for reaching out to us. About your question, the preemption configuration is not exclusively for 1G bps.  I was able to quickly modify the Gmac_Ip_InternalLoopback, to use preemption and 10M bps and it worked. Please share the following information so I can help you more:

• What do you mean when you say you "can't" configure it for 10M bps?
• Please describe how you are testing both configuration.
• Please share on which core you are running your application.
• Please share your RTD and/or BSP version.

Thanks.

[dongmin]

First of all, thank you for your answer. I had two S32G-VNP-RDB3 boards and connected GMAC to each other on a 1:1 link, and then proceeded with frame preemption. Core proceeded with M core. I proceeded without using loopback. At this time, I set the clock and settings like a picture, but I saw a phenomenon where the handshake for frame preemption did not occur at this time, just like tx,rx. I need a solution!

[alejandro_e]

hello @dongmin,

Thanks for the details. I will try to reproduce the issue on my side and then find a solution.

If possible please share the information I requested on my last reply.

Thanks. 

[dongmin]

I'm using it like this right now!

[alejandro_e]

Hello @dongmin,

Sorry for the late reply. I have not been able to reproduce your issue, is it possible to share your project with me? or a stripped version where you can see the problem? You can use the private message functionality of this community or create a private support ticket mentioning this thread.

Thanks.