S32 Design Studio for Power Architecture 2017.R1 - Update 10 available

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

S32 Design Studio for Power Architecture 2017.R1 - Update 10 available

S32 Design Studio for Power Architecture 2017.R1 - Update 10 available

 

 

 

nxp.png

Product Release Announcement

Automotive Microcontrollers and Processors

S32 Design Studio for Power Architecture 2017.R1 Update 10

S32DS_Logo_official_2016_scaled.png  

 

 

 

What is new?

pastedImage_2.png

pastedImage_3.png

Installation instructions

The update is available for online installation (via S32DS Eclipse Updater) or offline installation (direct download link)

pastedImage_1.png

  • offline installation:  
    • go to S32 Design Studio for Power product page -> Downloads section or use direct link to download the update archive zip file pastedImage_14.png
      • Start S32DS and go to "Help" -> "Install New Software..."
      • Add a new "Archive" repository and browse to select the downloaded update archive zip file you downloaded in the previous step
        pastedImage_22.png
      • Select all available items and click "Next" button.

 

This will start the update installation process.

Labels (2)
Attachments
Comments

When performing the above steps for online installation, selecting all components for update, I get a number of warnings, saying that certain components will not be installed.

pastedImage_1.png

Is that OK?

I started the install that had the warnings and got an installation error:

pastedImage_1.png

So we cannot install the update.  What are our options?  We wanted to install the update to prevent 'reset escalation' problems discussed in many places in this forum.

Finally I tried the offline-install.  This fails with the same error as above.

I performed a deinstallation of the system.

Then a new installation, but this time I kept the default settings for the installation position.

This worked without any errors.

(When I did the first install, I Installed to 'c:\Program Files\NXP' instead of the default C:\NXP.)

No ratings
Version history
Last update:
‎04-02-2019 01:14 PM
Updated by: