PF8100EPES&EQES OTP program issues

[Sam1978]

hi folks:

 I applied PF8100EPES and PF8100EQES for imx8qm6avufabb,also i setup a configure script for OTP burnning as per otp form in directory flexGUI,i tried to run this script to burn otp fuse with KITPF8200FRDMPGM tools,but it always restore to default value after re-power on ,anybody can give me your solutions if you met this issue ,thanks!

 best reguards

 Sam

Sam1978_0-1632381915556.png

Sam1978_1-1632381915672.png

Sam1978_2-1632381915787.png

disconnect usb cable,and power up again:

Sam1978_3-1632381915888.png

run read otp script,showed below:

Sam1978_4-1632381915837.png

[guoweisun]

Had already replied by case.