Overview
NXP® and Jungo Ltd. collaborated to deliver an Office-in-a-Box reference platform for the small-to-medium business (SMB) multi-service gateway market. The platform blends Jungo's field OpenSMB software with the NXP MPC8349E mITX reference board. The board features the MPC8349E PowerQUICC® II Pro processor containing a core built on Power Architecture technology and Vitesse's SparX Gigabit Ethernet switch technology.
The MPC8349E-mITX reference platform and Jungo's software provide a complete and integrated solution for designing SMB gateways. Create a fully functional gateway within minutes, using the hardware/software reference design.
Features
MPC8349E mITX Office in a Box Reference Platform features:
In addition to the highly integrated MPC8349E processor, the reference platform leverages external components to support these additional features:
- 10/100/1000 Ethernet port, a 5-port Gigabit Ethernet switch
- Four-port USB 2.0 interface
- On-board 4-port PCI serial advanced technology attachment (SATA) controller
- 32-bit PCI slot, and a 32-bit MiniPCI slot
- FLASH memory slot
- Robust memory subsystem
- Two-port RS-232C interface
- Power supply
- SATA hard drive
Jungo Software Features:
- OpenRG/OpenSMB Modules
- Routing and bridging
- Networking applications
- Network Address Translator (NAT)/Network Address Protocol Translator (NAPT)
- Web-based management
- Simple Network Management Protocol (SNMP)
- Remote firmware update
- PPP: PPPoA and PPPoE
- Firewall and security
- Content filtering
- VPN: IPSec, PPTP and L2TP
- WLAN security: WPA, 802.1x and RADIUS client
- File server
- Print server
- Zero Configuration
- VLAN
- IPv6
- VoIP: H.323, SIP and MGCP
- TR-069—WAN
- Zero Configuration
- Management Protocol
- TR-064—LAN-side DSL CPE Configuration
- QoS—End-to-end Quality of Service
- Dual WAN—Fail-over and load balancing
