ADC-DMA multi-channels trigger based on NXP MCUxpresso SDK - KE15&LPC51U68

[#1]

Hi:

This thread mainly introduces how to sample multi channels ADC with DMA. The slides is in Chinese.

For different MCU family, Kinetis & LPC has different ADC & DMA system. There takes KE15 & LPC51U68 for example, introduce how to enable various ADC & DMA trigger solution.

1.KE15:Three sample projects include:

1.1 LPIT HW trigger ADC & DMA transfer, enable interrupt for get ADC value;

1.2 LPIT HW trigger ADC & DMA transfer, DMA will automatically trigger next transfer;

1.3 Software trigger multi-ADC & DMA transfer; 

2.LPC51U68: Two sample projects include:

2.1 Software trigger multi-ADC & DMA transfer; 

2.2 SCT HW trigger ADC & DMA transfer, DMA will automatically trigger next transfer;

Products

Product Category	NXP Part Number	URL
MCU	KE15	Arm Cortex-M0+|Kinetis KE1xZ 32-bit 5V MCUs with Touch Interface | NXP
MCU	LPC51U68	LPC51U68 | NXP
MCUXpresso SDK Software	NXP standard SDK	Welcome | MCUXpresso SDK Builder

Tools

NXP Development Board	URL
FRDM-KE15Z Freedom Board	FRDM-KE15Z Platform|Freedom Development Board | NXP
LPCXpresso51U68 board	LPCXpresso51U68 board for LPC51U68 MCU | NXP

[marcodalzotto]

This is very interesting.
I've implemented the code on KE1x and KV3x processors and it works like a charm.

The setup code is not so easy, so I was wondering if anyone implemented the ADC DMA multichannel reading for both ADC0 and ADC1.

Thanks.