Model based design installtion problem

[jerry369]

Im getting errors on verfiying the installed nxp packages in matlab

>> NXP_Support_Package_S32K1xx

Error using contains
First argument must be text.

Error in NXP_Support_Package_S32K1xx>OpenToolbox_Callback (line 231)
result(i) = contains(toolboxes(i).Name, 'NXP_MBDToolbox_S32K1xx');
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Error in gui_mainfcn (line 95)
feval(varargin{:});
^^^^^^^^^^^^^^^^^^
Error in NXP_Support_Package_S32K1xx (line 34)
gui_mainfcn(gui_State, varargin{:});
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Error in matlab.graphics.internal.figfile.FigFile/read>@(hObject,eventdata)NXP_Support_Package_S32K1xx('OpenT...

Error using matlab.ui.internal.controller.uicontrol.UIControlController/triggerActionEvent (line 76)
Error while evaluating UIControl Callback.

[tim753milner]

Hello,

The key error here is:

Error using contains
First argument must be text.
This means the variable toolboxes(i).Name passed to contains is not a string or char array, which it must be.

Best Regard,

Tim

[jerry369]

So how to solve it??

[AlexCloutierDyname]

Hello Jerry,

I just had the same problem. 

In NXP_Support_Package_S32K3xx.m, replace these lines : 

result(i) = contains(toolboxes(i).Name, 'NXP_MBDToolbox_S32K3xx');

with: 

if isempty(toolboxes(i).Name)

else

result(i) = contains(toolboxes(i).Name, 'NXP_MBDToolbox_S32K3xx');

end

In my case, it seems like the toolboxes variable had an empty member, which caused the error. 

AlexCloutierDyname_0-1753212718436.png

You need to do this replacement three times in the .m.

Hope this helps,

Alex