Hello @ShivaB
What you are seeing on the FreeMASTER regarding the delay is somehow normal. FreeMASTER is communicating over UART and tries to request a lot of values each 100ms over an 115200 baudrate.
mariuslucianand_0-1732224556023.png
What I have tried, and you could do the same on your side is to create a simple Watch Subblock in the FreeMASTER to add only the last value from each battery cell controller. In my case case this resulted with no delay to the values.
mariuslucianand_1-1732224912579.png
Hope this helps,
Marius