RTOS on Simulink for MPC5744P

[ismael-wael]

Hello,

I want to use RTOS (for example: FreeRTOS) in Simulink for the MPC5744P board. 

How Can I do that?

Do you provide some toolbox on Simulink that supports using FreeRTOS or other RTOS for the MPC5744P board?

If not, can you explain how to integrate FreeRTOS in the S32 workspace with the generated C files from Simulink? i.e., integration after development (if possible).

Thank you.

[petervlna · Accepted solution]

Hello,

Do you provide some toolbox on Simulink that supports using FreeRTOS or other RTOS for the MPC5744P board?

MPC5744P FreeRTOS demo is included in S32DS as party of RTD.

https://community.nxp.com/t5/MPC5xxx/FreeRTOS-for-DEVKIT-MPC5744P/m-p/667743

However I have no info if there is any toolbox for simulink for it.

If not, can you explain how to integrate FreeRTOS in the S32 workspace with the generated C files from Simulink? i.e., integration after development (if possible).

Here are the tutorials on MDBT:

https://community.nxp.com/t5/Model-Based-Design-Toolbox-MBDT/bd-p/mbdt

Basically, you can follow them to understand how to included all generated c,h and library files and compile the project.

Regarding simulink and MDBT I suggest you to ask questions at dedicated forum in link above.

Best regards,

Peter