Questions about how to use the PNEV7462C development board

[FSubvert]

How to use the PNEV7462C development board to drive an NFC board with a PN7462 chip? Can it be driven by USB signal?

[Fabian_R]

Hello, my name is Fabian, I've been assigned to support your case.

Thank you for your interest in our products

I believe I'm not understanding your question but, I will try to explain a little the development environment for PN7462.

• OM27462CDKP is a kit that contains the PN7462 Evaluation board + LPC Link2 (debugger) + NFC cards (PICCs).
• PNEV7462C the same PN7462 Evaluation board from the full kit but, you will need the LPC Link2 for debugging.

Regarding the question, if can be driven by USB signal, yes. We actually provide an NFC Reader Library that has a series of examples, one of them is intended to show the work using USB through PC/SC interface.

In order to use the evaluation board and, run the examples we highly recommend the use of our MCUXpresso IDE.