KL25Z support in CW 11.1

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

KL25Z support in CW 11.1

跳至解决方案
2,121 次查看
nathan_morgan
Contributor I

Does CW 11.1 support the KL25Z microcontroller? I cant find anything online about it and dont know how to create a barebones project otherwise.

kl25z

codewarrior

标签 (1)
标记 (2)
0 项奖励
回复
1 解答
2,055 次查看
Alice_Yang
NXP TechSupport
NXP TechSupport

Hello nathan morgan,

The CW v11.1 support kinetis, also support kl25, from your picture, I think you haven't choose kinetis

when install CW, please reinstall it again.

pastedImage_1.png

Recommend you download  the offline mode as below:

pastedImage_2.png


Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

在原帖中查看解决方案

0 项奖励
回复
1 回复
2,056 次查看
Alice_Yang
NXP TechSupport
NXP TechSupport

Hello nathan morgan,

The CW v11.1 support kinetis, also support kl25, from your picture, I think you haven't choose kinetis

when install CW, please reinstall it again.

pastedImage_1.png

Recommend you download  the offline mode as below:

pastedImage_2.png


Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

0 项奖励
回复