Does CW 11.1 support the KL25Z microcontroller? I cant find anything online about it and dont know how to create a barebones project otherwise.
kl25z
codewarrior
Solved! Go to Solution.
Hello nathan morgan,
The CW v11.1 support kinetis, also support kl25, from your picture, I think you haven't choose kinetis
when install CW, please reinstall it again.
Recommend you download the offline mode as below:
Have a great day,
TIC
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------
Hello nathan morgan,
The CW v11.1 support kinetis, also support kl25, from your picture, I think you haven't choose kinetis
when install CW, please reinstall it again.
Recommend you download the offline mode as below:
Have a great day,
TIC
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------