KL25Z support in CW 11.1

キャンセル
次の結果を表示 
表示  限定  | 次の代わりに検索 
もしかして: 

KL25Z support in CW 11.1

ソリューションへジャンプ
2,132件の閲覧回数
nathan_morgan
Contributor I

Does CW 11.1 support the KL25Z microcontroller? I cant find anything online about it and dont know how to create a barebones project otherwise.

kl25z

codewarrior

ラベル(1)
タグ(2)
0 件の賞賛
返信
1 解決策
2,066件の閲覧回数
Alice_Yang
NXP TechSupport
NXP TechSupport

Hello nathan morgan,

The CW v11.1 support kinetis, also support kl25, from your picture, I think you haven't choose kinetis

when install CW, please reinstall it again.

pastedImage_1.png

Recommend you download  the offline mode as below:

pastedImage_2.png


Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

元の投稿で解決策を見る

0 件の賞賛
返信
1 返信
2,067件の閲覧回数
Alice_Yang
NXP TechSupport
NXP TechSupport

Hello nathan morgan,

The CW v11.1 support kinetis, also support kl25, from your picture, I think you haven't choose kinetis

when install CW, please reinstall it again.

pastedImage_1.png

Recommend you download  the offline mode as below:

pastedImage_2.png


Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

0 件の賞賛
返信