RT1052烧录

[qiang]

jlink连接RT1052主板总是失败

[qiang]

您好，MCUXpresso ide 控制台显示以下信息代表烧录成功了吧

[kerryzhou]

Hi qiang,

   你这个结果不是很好嘛，内核Cortex M7也找到了，然后flash也烧进去了。

还有什么问题呢？

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------

[qiang]

暂时没有了，非常感谢

[kerryzhou]

Hi qiang,

   好的，如果问题解决了，还请你标下正确答案， 用于关掉这个帖子。

    以后如果还有任何问题，欢迎你创建新的问题贴。

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------

[qiang]

我昨天已经可以烧录了，今天不知道怎麽回事又烧录不了了

[kerryzhou]

你试试这个方法：

板子进入serial downloader模式，然后再去连或者擦除用JLINK。

实在不行，你用MCUBootUtility使用Uart或者HID去链接试试。

https://github.com/JayHeng/NXP-MCUBootUtility/archive/v2.3.1.zip
the related user manual is:
https://github.com/JayHeng/NXP-MCUBootUtility

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------

[kerryzhou]

Hi qiang

  楼主你好！

  你选择的是JTAG接口吗？

   你要选择SWD接口，RT芯片默认是使用SWD接口的。

   另外你的板子是自己设计的板子还是官方的EVK 板子？

  你先用SWD接口试试，还有，你截图要把所有JLINK COMANDER的信息都给我截出来，我要看全部信息。

Wish it helps you!

If you still have questions about it, please kindly let me know!

Best Regards,

Kerry

-------------------------------------------------------------------------------

Note:

- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored

Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-----------------------------------------------------------------------------

[qiang]

好的我试试SWD格式

[qiang]

问题已解决，谢谢