MIMXRT106 Arbitrary Flash Memory

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MIMXRT106 Arbitrary Flash Memory

1,039 Views
accatpaliz
Contributor II

Using MIMXRT106F MCU , could i use any arbitrary flash memory? for example a simple SPI flash i have used previously? if so i guess we need to write our driver to work with SPI flash and load it to ram at the beginning of programming process. is there any document to help me?

0 Kudos
Reply
2 Replies

1,025 Views
accatpaliz
Contributor II

i am designing now. and must choose decision about flash memory. because suggested hyper flash is expensive and my supplier could not find it easily in the market. thanks for any tips

0 Kudos
Reply

1,012 Views
PabloAvalos
NXP TechSupport
NXP TechSupport

Hi @accatpaliz 

 

Thank you so much for your patience and for your interest in NXP Semiconductor products.

 

Regarding your questions, I think there is no way to use an external SPI Flash memory. I would highly recommend you to refer to these links that might be helpful based on your needs.:

https://www.nxp.com/docs/en/nxp/application-notes/AN12238.pdf

https://community.nxp.com/t5/i-MX-RT/How-to-boot-from-external-qspi-flash/td-p/1061926

 

Please let me know your comments or if you have more questions.

 

Thank you in advance.
Best Regards.
Pablo Avalos.

0 Kudos
Reply