Use GPIOs on FRDM-IMX93

[Ralf71]

How can i use the GPIOs on the FRDM-IMX93 Board? Like simple GPIOs, CAN, I2c  etc?

Thanks
Ralf

[danielchen · Accepted solution]

Hi 

There is one 10-pin connector P12 is provided on the board to support I2C, CAN and ADC connections. The developers can use the port for some specific application development.

P11 is provided on the FRDM-IMX93 board to support i2s, uart, i2c and GPIO connections.

In section 3.7 of UG10195 describes how to run the ARM cortex-M image.

danielchen_0-1739545212704.png

Please refer to UM12181 FRDM-IMX93 Board User Manual for more details

https://docs.nxp.com/bundle/UM12181/page/topics/frdm-imx93_overview.html

Regards

Daniel