FAQs
English (US) 日本語 | Japanese 中文 | Chinese (Simplified)

Is QSPI flash necessary for IMX8M+ with eMMC

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Is QSPI flash necessary for IMX8M+ with eMMC

‎05-30-2024 06:19 AM
312 Views
balaecon
Contributor I

Hi Team,

We are designing a custom carrier board derived from IMX8M+ EVK reference design. We plan to have only the eMMC chip and not the QSPI flash (ref des "U4" in SCH-46881 EVK) in our design.

Processor Part planned for use: MIMX8ML8CVNKZAB

balaecon_0-1717074962169.png

Our understanding is that QSPI chip is provided in the reference design for evaluation purposes and its possible to use only eMMC. Can you please let us know if our understanding is correct?

Is there anything else we would need to know from a hardware/firmware standpoint as far as QSPI removal is concerned?

0 Kudos
Reply
1 Reply

‎05-30-2024 08:04 AM
294 Views
JorgeCas
NXP TechSupport
NXP TechSupport

Hello,

 

Our understanding is that QSPI chip is provided in the reference design for evaluation purposes and its possible to use only eMMC. Can you please let us know if our understanding is correct?

 

Yes, that is correct.

 

Is there anything else we would need to know from a hardware/firmware standpoint as far as QSPI removal is concerned?

 

You only need to remove it from device tree.

 

Best regards.

0 Kudos
Reply