Imx6ull Debugging Cutting Screen

[xiang_1001]

Imx6ull debugs the cutting screen of 1024*400, and the timing of the screen is shown below. Some pictures can't be displayed now. How to adjust them?

[JosephAtNXP]

Hi,

Thank you for your interest in NXP Semiconductor products,

Please make sure that your display module has the right configuration.

https://github.com/nxp-imx/linux-imx/blob/dfaf2136deb2af2e60b994421281ba42f1c087e0/Documentation/dev...

https://github.com/nxp-imx/linux-imx/blob/dfaf2136deb2af2e60b994421281ba42f1c087e0/Documentation/dev...

https://github.com/nxp-imx/linux-imx/blob/dfaf2136deb2af2e60b994421281ba42f1c087e0/Documentation/dev... 

Regards

[xiang_1001]

This screen is a cutting screen, and now only part of it is displayed. How do you display the whole screen?