Camera Compatible with i.MX 93 FRDM Development Board

[Kyuubi0323]

Hi, im facing a problem with the camera csi2 of the FRDM i.MX 93 Board.
When i read the hardware reference of that board on the CSI port P6. i see that, theoretically, if i using a camera like Raspberry Pi camera module V2 (with 15P 1mm FPC) then convert using 15P to 22P 0.5mm FPC, it can plug into the camera connector of that FRDM board. 
By the way, when i plug it on the board and boot it. The logs show that, no module is load via 'lsmod' command. 
As expected, im using this imx219 driver, and my kernel has prebuilt kernel module imx219=m. But it's not showing anything at all. 
IMX93QSB  FRDM-i.MX93 

[joanxie]

did you add the new camera in the dts files? could you share the logfile and your develop code?