- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear All,
Hello.
Refer to the 4.2.1 Power-Up Sequence in i.MX6SDL data sheet (IMX6SDLCEC Rev.4).
There is below limitation.
— VDD_ARM_CAP must not exceed VDD_SOC_CAP by more than +100 mV.
But, i.MX6DQ data sheet doesn't describe this limitation.
Is it possible to ignore this limitation for i.MX6DQ?
Best Regards,
Keita
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Keita
this is described in IMX6DQCEC p.22
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Keita
this is described in IMX6DQCEC p.22
Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Igor,
Thank you for your quick answer.
OK. I got it.
Best Regards,
Keita