5.10.52 Demo Image can not boot up on imx8mq evk Demo board.

[charleshuang]

Hi NXP Team

In NXP web side, we try the 5.10.52_2.1.0 Demo Image can not boot up on imx8mq evk Demo board.

Do you have any advice?

The log message will be show " Preparing Automatic Repair Loading files..." in Debug message.

[Rita_Wang]

Which version of the i.MX8MQ board are you using? And could you tell us are you download images to emmc or SD card? Have you finished download?

[charleshuang]

Hi NXP Team

The IMX8M EVK Demo board.

I can fine the (170-39920 REV A) (TR19210881) (2018 NXP) in IMX8M EVK Demo board.

Download image to SD card.

Yes I already finished download. (I try many time).

[Rita_Wang]

How about the boot command line setting when u-boot boot up.  I will try it on my board and then tell you the result.

[charleshuang]

Hi NXP Team

I used the demo image and flash to SD card.

Then I  try to boot form SD in Demo board.

Uboot command :   

 #env default -a 

 #save

[charleshuang]

Hi NXP Team

I  try the 5.10.72 demo Image , the result is the same with 5.10.52.

When the debug port show " Booting /efi\boot\bootaa64.efi"

Then system will be show " Preparing Automatic Repair"

                                          "Loading files...."

Then system hung up.

[charleshuang · Accepted solution]

Hi NXP Team

The Question can closed.

We know why can not boot. 

Thanks NXP. 

[Rita_Wang]

Did the u-boot boot up?

[charleshuang]

Hi NXP

Yes,  it's already boot up u-boot.

Do you have the imx8mq evk demo board? You can try it, then you will be know it.