Config Tools for i.MX v25.09 Now Available

[#1]

We are pleased to announce that Config Tools for i.MX v25.09 are now available.

Downloads & links

• To download the installer for all platforms, please login to our download site via: 
  • https://www.nxp.com/design/designs/config-tools-for-i-mx-applications-processors:CONFIG-TOOLS-IMX
• Please refer to  Documentation  for installation and quick start guides.
• For further information about DDR config and validation, please go to this  blog post.

Release Notes

Full details on the release (features, known issues...)

• The Release Notes format is updated from plain text to markdown.
• The newly generated configuration includes the default NXP copyright notice and is licensed under the
BSD-3-Clause license.
• DDR tool
– ODT and Driver Strength Updates for LP4/LP5 on i.MX 943 and i.MX 95
– Improved DRAM Configuration for i. MX 9x devices
– Multicore support is enabled for DDR tests on i.MX 943 and i.MX 95
– Linux support for the DDR tool
– Vref DQ Setting now available in the GUI
– Board-agnostic SM Support for i.MX 943 and i.MX 95
– DDR part number entry is supported in the GUI
– Enhanced logging from the target application
– Stress test repetition option is enabled
– Updated ODT shmoo scenario values on i.MX 943 and i.MX 95
– Support for SNPS FW and PHY Init 2024.09 SP2 on i.MX 943 and i.MX 95
– AHAB image update to align with BSP for CES parts on i.MX 943 and i.MX 95
– New configuration support for 15x15 on i.MX 943
– Improved bus configuration for single-channel setups
– LP4/LP5 CS signal configuration now exposed in the GUI for i.MX 943 and i.MX 95
• Clocks
– Supported input frequency setting
• System Manager
– Initial version of the tool

[#2]

Release Notes

Full details on the release (features, known issues...)

• The Release Notes format is updated from plain text to markdown.
• The newly generated configuration includes the default NXP copyright notice and is licensed under the
BSD-3-Clause license.
• DDR tool
– ODT and Driver Strength Updates for LP4/LP5 on i.MX 943 and i.MX 95
– Improved DRAM Configuration for i. MX 9x devices
– Multicore support is enabled for DDR tests on i.MX 943 and i.MX 95
– Linux support for the DDR tool
– Vref DQ Setting now available in the GUI
– Board-agnostic SM Support for i.MX 943 and i.MX 95
– DDR part number entry is supported in the GUI
– Enhanced logging from the target application
– Stress test repetition option is enabled
– Updated ODT shmoo scenario values on i.MX 943 and i.MX 95
– Support for SNPS FW and PHY Init 2024.09 SP2 on i.MX 943 and i.MX 95
– AHAB image update to align with BSP for CES parts on i.MX 943 and i.MX 95
– New configuration support for 15x15 on i.MX 943
– Improved bus configuration for single-channel setups
– LP4/LP5 CS signal configuration now exposed in the GUI for i.MX 943 and i.MX 95
• Clocks
– Supported input frequency setting
• System Manager
– Initial version of the tool

[#3]

Release Notes

Full details on the release (features, known issues...)

• The Release Notes format is updated from plain text to markdown.
• The newly generated configuration includes the default NXP copyright notice and is licensed under the
BSD-3-Clause license.
• DDR tool
– ODT and Driver Strength Updates for LP4/LP5 on i.MX 943 and i.MX 95
– Improved DRAM Configuration for i. MX 9x devices
– Multicore support is enabled for DDR tests on i.MX 943 and i.MX 95
– Linux support for the DDR tool
– Vref DQ Setting now available in the GUI
– Board-agnostic SM Support for i.MX 943 and i.MX 95
– DDR part number entry is supported in the GUI
– Enhanced logging from the target application
– Stress test repetition option is enabled
– Updated ODT shmoo scenario values on i.MX 943 and i.MX 95
– Support for SNPS FW and PHY Init 2024.09 SP2 on i.MX 943 and i.MX 95
– AHAB image update to align with BSP for CES parts on i.MX 943 and i.MX 95
– New configuration support for 15x15 on i.MX 943
– Improved bus configuration for single-channel setups
– LP4/LP5 CS signal configuration now exposed in the GUI for i.MX 943 and i.MX 95
• Clocks
– Supported input frequency setting
• System Manager
– Initial version of the tool

[#4]

Release Notes

Full details on the release (features, known issues...)

• The Release Notes format is updated from plain text to markdown.
• The newly generated configuration includes the default NXP copyright notice and is licensed under the
BSD-3-Clause license.
• DDR tool
– ODT and Driver Strength Updates for LP4/LP5 on i.MX 943 and i.MX 95
– Improved DRAM Configuration for i. MX 9x devices
– Multicore support is enabled for DDR tests on i.MX 943 and i.MX 95
– Linux support for the DDR tool
– Vref DQ Setting now available in the GUI
– Board-agnostic SM Support for i.MX 943 and i.MX 95
– DDR part number entry is supported in the GUI
– Enhanced logging from the target application
– Stress test repetition option is enabled
– Updated ODT shmoo scenario values on i.MX 943 and i.MX 95
– Support for SNPS FW and PHY Init 2024.09 SP2 on i.MX 943 and i.MX 95
– AHAB image update to align with BSP for CES parts on i.MX 943 and i.MX 95
– New configuration support for 15x15 on i.MX 943
– Improved bus configuration for single-channel setups
– LP4/LP5 CS signal configuration now exposed in the GUI for i.MX 943 and i.MX 95
• Clocks
– Supported input frequency setting
• System Manager
– Initial version of the tool

[#5]

Release Notes

Full details on the release (features, known issues...)

• The Release Notes format is updated from plain text to markdown.
• The newly generated configuration includes the default NXP copyright notice and is licensed under the
BSD-3-Clause license.
• DDR tool
– ODT and Driver Strength Updates for LP4/LP5 on i.MX 943 and i.MX 95
– Improved DRAM Configuration for i. MX 9x devices
– Multicore support is enabled for DDR tests on i.MX 943 and i.MX 95
– Linux support for the DDR tool
– Vref DQ Setting now available in the GUI
– Board-agnostic SM Support for i.MX 943 and i.MX 95
– DDR part number entry is supported in the GUI
– Enhanced logging from the target application
– Stress test repetition option is enabled
– Updated ODT shmoo scenario values on i.MX 943 and i.MX 95
– Support for SNPS FW and PHY Init 2024.09 SP2 on i.MX 943 and i.MX 95
– AHAB image update to align with BSP for CES parts on i.MX 943 and i.MX 95
– New configuration support for 15x15 on i.MX 943
– Improved bus configuration for single-channel setups
– LP4/LP5 CS signal configuration now exposed in the GUI for i.MX 943 and i.MX 95
• Clocks
– Supported input frequency setting
• System Manager
– Initial version of the tool