how to assigned ID for multiple sleeping device in JN5168?

[dheerajsawant]

Hello mario_castaneda‌, 

I am using JN5168-001-M00 Module.

after finishing data transfer from Sleeping Device to Coordinator Successfully. 

Now i want to assigned ID for SED(Sleeping End Device). 

In multiple SED(Sleeping End Device):

How will i understand that which SED(Sleeping End Device) is sending data to coordinator. 

is there any API?

so i can assigned A ID for SED(Sleeping End Device).

I hope you understand my question.

Best Regards, 

Dheeraj Sawant

[mario_castaneda]

Hi Dheeraj,

I'm sorry, What do you mean with ID for sleep end device?

Do you want to modify the short address assigned by the coordinator?

Regards,

Mario

[dheerajsawant]

Hello mario_castaneda‌, 

Did you find any solution for this?

or any available API is Present?

Best Regards, 
Dheeraj Sawant

[mario_castaneda]

Hi Dheeraj,

You will look for the source address from the message and it will depend on the type of destination, please see the Table 7: Addressing Modes

This structure is used in the ZPS_EVENT_APS_DATA_INDICATION event, which indicates the arrival of data on the local node.

ZPS_tsAfDataIndEvent

https://www.nxp.com/docs/en/user-guide/JN-UG-3101.pdf?fsrch=1&sr=9&pageNum=1 

Regards,

Mario

[dheerajsawant]

Hello mario_castaneda‌, 

ID means i just wanted to assign a Number to Sleeping End Device.

like example:

if i am having more than 20 sleeping End Device who are sending data to Coordinator. (All are Working)

but i want to find out that which Sleeping End Device is sending data to coordinator. 

same thing i want to do.

Hope you understand!

Best Regards, 

Dheeaj Sawant