Sensor Toolbox&KwikStick

[georgek]

Hi,

We want to use your MMA45xQ Sensor Toolbox and connect the sensor boards to the KwikStick board. Is it possible?

Thanks for your advice,

George

[TomasVaverka · Accepted solution]

George,

Sensor toolbox sensor boards are not directly compatible with the TWRPI socket on the KwikStik board.

I would recommend using the TWRPI-MMA845XQ board that is compatible with the KwikStik board:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=TWRPI-MMA845XQ

I have also attached its schematic.

Regards,

Tomas

[georgek]

Thanks for your prompt reply, Tomas! We will use the the TWRPI-MMA845XQ board.

George