Dear community,
I consider the Transient interrupt threshold value.
In the case of setting to register value as follows,
when does the Transient interrupt occur ?
0x1F:TRANSIENT_THS Register THS[6:0] to 000_0000b.
0x1D:TRANSIENT_CFG Register HPF_BYP to 1.
Which is the Transient interrupt trigger point value ,
" greater than or equal to ZERO G " or " greater than ZERO G " ?
Best Regards,
Koichi Sakagami
Dear Tomas san,
Thank you for your reply.
> What is the use of such settings?
I would like to detect a less than 0.063g transient.
Best Regards,
Koichi Sakagami
Dear Koichi-san,
The minimum threshold resolution is 0.063g (TRANSIENT_THS = 0x01). None of our accelerometers offer higher resolution.
Best regards,
Tomas
Dear Koichi-san,
What is the use of such settings? The interrupt would be generated whenever the acceleration is higher than 0g.
Best regards,
Tomas