I have three kinds tool:
A.PEmicro
B.PEcyclone
C.jLink
if i flash the chip with A (on s32ds),the chip work successful.
but if i use B or C , Instant display success, still does not work.
Than i read out the memory of the chip,The above three reads are the same.
But why only flash with the PEmicro the chip can work?
"but if i use B or C , Instant display success, still does not work."
Can tell me more detail about your description? I'm using OpenSDA(PE) and J-link both, it works fine on my side.