S32K344 Whiteboard Example Project

[StephenDu]

@S32kUser 

The S32K344 Whiteboard (S32K344-WB) is a reference design board for providing quick prototype verification, such as Body Domain Control, Gateway, Passive Entry Passive Start (PEPS), Motor Control, and so on. It Based on the 32-bit Arm® Cortex®-M7 S32K3 MCU in a 257 MPABGA package.
To help customers get familiar with the hardware quickly, a set of example projects are provided based on the Real-Time Drivers(RTD) provided by NXP. With these example projects, you can have an out-of-box experience with the S32K344-WB reference design. You can get this example package from the attachment on this page.

[StephenDu]

We have provided a richer sample project. Please take it if you needed.

[GavinLi1]

Thanks for the info!

I have build errors when import the examples, shows at:

Also, I import the EB project, shows error:

Anything else I miss?

The S32DS  version:

S32 Design Studio for S32 Platform
Version: 3.5
Build id: 231128 (Update

Is it ok to compile the examples?

Thanks in advance!

Gavin

[GavinLi1]

I checked that again, it seems the issue for the EB.

I re-installed it and it's ok now. Projects can be built pass.

[StephenDu]

To get more Multi-Core example projects, please switch to the page: S32K324 Multi-Core Example Project based on Whiteboard

[StephenDu · Accepted solution]

To get more example projects for S32K344-WB, please contact me.

[yomna_attia]

Hello, 

Could you send me an example for client program, such as SocketTest, for the S32K344 WHITEBOARD?

Thanks in advance, 

[StephenDu]

hi, Yomna

Due to this is a third-party software (Not sure the license limitation), please download by yourself. I can only to tell you the name which we are using: Wireshark.

[yomna_attia]

I mean what are the steps to configure the ethernet example for the S32K344 WB to be client (use the Socket example as Client ).

 Thanks in advance .

[yomna_attia]

I tried to reconfigure the LWIP example to be CLient but i faced this lwip_connect function returns error out of memory and i don't know why this happen so if you have a client example working properly could you you sent it to me

Thanks in advance 

[Mossab]

Hi, 

would you please send me TCP/IP example that compatible with the mentioned board

[StephenDu]

hi, Mossab

The TCP/IP (LWIP) only has the LLD version, it is included in the S32K344_Whiteboard_Example(LLD)_RTM_1.0.0.zip attached in this page, please download and install it (Above this message).

[yomna_attia]

I want LWIP example

[StephenDu]

hi, Yomna

The LWIP only has the LLD version, it is included in the S32K344_Whiteboard_Example(LLD)_RTM_1.0.0.zip attached in this page, please download and install it (Above this message).

[yomna_attia]

I already checked it and i found the lwip example thank you for your support 

I also have another question is this example client or server and what's the configured ip address

[daich]

I use s32k344 now, and i want to get some IAR project.

how to get it? thank you very much!

[StephenDu]

hi,

In the attachment, there is include one IAR example project which located in the IAR folder. You can create your own project based on this example project.

[savantwxj]

Hi 

Would you help provide the mcal eb project of this S32K344 Whiteboard? I will use it as a starting point of my own mcal eb project based on our own HW board. Thanks!

[StephenDu]

hi, savantwxj In fact, it is there. Please refer to the "Tresos_Project" folder in each example project.

[savantwxj]

Yes, but I need a full mcal eb project which has much more modules inside if You already had one.

[StephenDu]

We don't have such complex example project. But I think you can import the modules which you want one by one based on any example project. If you have question during this process, please let me known.