S32K344 AdvanceLifecycle

[xionggang]

Hi ，NXP team：

I have installed HSE and programed ADKP，when I call HSE_AdvanceLifecycle，it‘s return HSE_SRV_RSP_NOT_ALLOWED.

hse_firmware_version is 2.55.0

the S32DS project is S32K3_HSE_DemoExamples_1_0_0\...\S32K344_Basic_SecureBoot

May I ask what the problem is

[Robin_Shen · Accepted solution]

Hi xionggang,

Please test the S32K344_CQC_DEMO project. 
C:\NXP\S32K3_HSE_DemoExamples_1_0_0\S32K3_HSE_DemoExamples\Device_Configuration\S32K344_CQC_DEMO
This project demonstrates how to advance the lifecycle. Please follow the instructions in S32K344_CQC_DEMO/Readme.md. You will need to set the macro ***LC_ADVANCE*** to 1

By the way, please use the S32K344_SBAF_UPDATE project to update the SBAF (S32K344 SBAF 0.15.0 RTM Release) to be compatible with this version of HSE FW.
C:\NXP\S32K3_HSE_DemoExamples_1_0_0\S32K3_HSE_DemoExamples\Device_Configuration\S32K344_SBAF_UPDATE

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

[Robin_Shen]

Please note that during the Christmas holiday period, our support response times may be longer than usual. In some cases, your request might be addressed after the New Year. Thank you for your understanding.

[xionggang]

Thank you. Merry Christmas