FRDM-A-S32K358 question

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

FRDM-A-S32K358 question

Jump to solution
85 Views
SSSkkkmolea
Contributor I

I am considering purchasing the FRDM-A-S32K358 board, but I need to know if it supports SD card functionality, two CAN channels, and two UARTs (TTL). If not, I confirmed that the S32K3X8EVB-Q289 supports these features, but I am only considering it because it is too expensive. If the FRDM-A-S32K358 has these capabilities, I plan to purchase that one. Please confirm this for me.

0 Kudos
Reply
1 Solution
44 Views
Robin_Shen
NXP TechSupport
NXP TechSupport

Hi

I compared the S32K3X8EVB-Q289 Hardware User Manual with the initial version of the FRDM-A-S32K358 development board Hardware User Manual.

Unfortunately, the FRDM-A-S32K358 only has one CAN interface, with the TJA1043 used as the CAN transceiver. Unlike the S32K3X8EVB-Q289, which has two CAN interfaces, both using the TJA1153 as the CAN transceiver.

UART TTL can be directly derived from the LPUART pins of the S32K358, so I am certain that both evaluation boards have more than 2 UART TTL channels.


Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-------------------------------------------------------------------------------

View solution in original post

0 Kudos
Reply
2 Replies
45 Views
Robin_Shen
NXP TechSupport
NXP TechSupport

Hi

I compared the S32K3X8EVB-Q289 Hardware User Manual with the initial version of the FRDM-A-S32K358 development board Hardware User Manual.

Unfortunately, the FRDM-A-S32K358 only has one CAN interface, with the TJA1043 used as the CAN transceiver. Unlike the S32K3X8EVB-Q289, which has two CAN interfaces, both using the TJA1153 as the CAN transceiver.

UART TTL can be directly derived from the LPUART pins of the S32K358, so I am certain that both evaluation boards have more than 2 UART TTL channels.


Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-------------------------------------------------------------------------------

0 Kudos
Reply
35 Views
wj_kwak
Fresh Out Contributor
Hello i register company email
0 Kudos
Reply